How to Fix Bad JTAG NAND Flashes!

Causes:

The KV was bad or somehow corrupt
User error, mistakenly entered wrong data
The NAND already has bad blocks

etc. the list goes on but those are the most probable cause


What you'll Need!

1. Original/Working NAND Dump Renamed updflash.bin

2. Working USB Drive

3. Hands & Fingers

4. Computer

The Fix!

1. Drag the working updflash.bin into the root of the USB (For most USB, that just means drag into the USB)

2. Turn off JTAG

3. Unplug ALL Cables from JTAG

4. Plug your USB into preferably the front slot of your JTAG

5. Connect the AV Cable

6. Connect the Power cord

7. Plug your Xbox into the power outlet

8. Turn your xbox Via the **Eject button thus starting XeLL

9. Wait for XeLL to finish updating

10. Power Cycle


CONGRATS ON FIXING YOUR JTAG!




** If you dont have a DVD Drive so that you can EJECT, plug a wired controller to the back USB ports of the console then boot to XeLL from there!


If there is anything I missed I will add ASAP!