Tutorial:
How to Format a Large USB Drive to FAT32 for use with an Xbox 360
By: Xbox360Xperts

This tutorial will give you a step by step how to format a 1TB or larger drive to FAT32 in order to work with your Xbox 360.

What youll need:
CompuApps Swissknife V3 ( [ Register or Signin to view external links. ] )

1. Once Swissknife has installed open the program. Youll be presented with a window similar to the picture below.

2. Click on the USB drive (assuming that you have the drive in a USB enclosure) and check the details of the drive.
[ Register or Signin to view external links. ]

3. Right click on the Primary partition and click format. Note: DO NOT click on the Partition and Format button in the left menu as it will format the drive, but only to about 450GB.
[ Register or Signin to view external links. ]

4. Click the pull-down menu and select FAT 32, rename the drive if desired, and then click Start
[ Register or Signin to view external links. ]

5. You will be prompted to confirm that you will lose all data. Click Yes to continue.
[ Register or Signin to view external links. ]

6. A window will pop up showing the progress of the format. Once the format is complete the window will remain. Click the red X in the top right corner to close the window. The newly formatted drive will still show up with the same information as it did prior to formatting. [ Register or Signin to view external links. ]

7. All you need to do now is unplug the drive from the USB port and then replug it back in. The drive should show up as FAT32 and the name you gave it in step 4.
[ Register or Signin to view external links. ]