You are viewing our Forum Archives. To view or take place in current topics click here.
#761. Posted:
Status: Offline
Joined: May 18, 201112Year Member
Posts: 16,360
Reputation Power: 24344
Status: Offline
Joined: May 18, 201112Year Member
Posts: 16,360
Reputation Power: 24344
LooseDiamond wrote Hi r00t,
Can you please tell me what is a better motherboard out of these;
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Thanks for your time
The Extreme4 is the better board. It has a much better VRM and an 8-pin EPS connector as opposed to the Gigabyte board's 4-pin connector.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
-Deep- wrote Please help me r00t. I made a video to help you understand my problem.
[ Register or Signin to view external links. ]
That article may be able to help you. The requirements on graphics card boxes are always meaningless as well, and considering this card runs off the bus connection, that's not the issue unless the board cannot provide enough power for it. I strongly doubt that's the problem. You also could try this:
[ Register or Signin to view external links. ]
- 0useful
- 0not useful
#762. Posted:
Status: Offline
Joined: Jul 15, 201211Year Member
Posts: 958
Reputation Power: 37
Status: Offline
Joined: Jul 15, 201211Year Member
Posts: 958
Reputation Power: 37
r00t wroteLooseDiamond wrote Hi r00t,
Can you please tell me what is a better motherboard out of these;
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Thanks for your time
The Extreme4 is the better board. It has a much better VRM and an 8-pin EPS connector as opposed to the Gigabyte board's 4-pin connector.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
-Deep- wrote Please help me r00t. I made a video to help you understand my problem.
[ Register or Signin to view external links. ]
That article may be able to help you. The requirements on graphics card boxes are always meaningless as well, and considering this card runs off the bus connection, that's not the issue unless the board cannot provide enough power for it. I strongly doubt that's the problem. You also could try this:
[ Register or Signin to view external links. ]
Thanks but the 1st link I ran into before and was no help but I shall run the Memory Diagnostics Tool now but it means I have to restart so see you in 5-10 mins. Also while I am gone this may be help to you-
Memory SPD
DIMM # 1
SMBus address 0x50
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 1024 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number NT1GT64U8HA0BY-37B
Serial number 56312D83
Manufacturing date Week 47/Year 06
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
AMP yes
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 3.0-3-3-9-12 @ 200 MHz
JEDEC #2 4.0-4-4-12-16 @ 266 MHz
JEDEC #3 5.0-4-4-12-16 @ 266 MHz
AMP profile
Min Cycle time 1.#IO ns (0 MHz)
Max CL -2147483648.0
Min tRP 1.#J ns
Min tRCD 1.#J ns
Min tRAS 1.#J ns
Min tRFC 1.#J ns
AMP timings table CL-tRCD-tRP-tRAS-tRC @ frequency
AMP #1 -2147483648.0--2147483648--2147483648--2147483648--2147483648 @ 0 MHz
DIMM # 2
SMBus address 0x52
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Kingston (7F98000000000000)
Size 2048 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number 2G-UDIMM
Serial number 7E151F2F
Manufacturing date Week 22/Year 08
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
AMP yes
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 3.0-3-3-9-12 @ 200 MHz
JEDEC #2 4.0-4-4-12-16 @ 266 MHz
JEDEC #3 5.0-5-5-15-20 @ 333 MHz
AMP profile
Min Cycle time -1.000 ns (-1 MHz)
Max CL -2147483648.0
Min tRP -1.#J ns
Min tRCD -1.#J ns
Min tRAS 1.#J ns
Min tRFC -1.#J ns
AMP timings table CL-tRCD-tRP-tRAS-tRC @ frequency
AMP #1 -2147483648.0--2147483648--2147483648--2147483648--2147483648 @ -1 MHz
DIMM # 1
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 80 08 08 0E 0A 61 40 00 05 3D 50 00 82 08 00 00
10 0C 04 38 01 02 00 01 3D 50 50 60 3C 1E 3C 2D 80
20 25 37 10 22 3C 1E 1E 00 00 3C 69 80 1E 28 00 51
30 7A 4B 2E 27 21 25 17 34 23 25 00 00 00 00 12 F8
40 7F 7F 7F 0B 00 00 00 00 08 4E 54 31 47 54 36 34
50 55 38 48 41 30 42 59 2D 33 37 42 20 00 06 47 56
60 31 2D 83 88 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 4D 46 30 36 42 32 30 30 31
90 41 00 00 00 00 00 00 32 35 36 33 32 34 32 2D 30
A0 36 A1 00 00 00 00 00 00 01 4E 54 44 32 00 34 2D
B0 31 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 80 00 00 00 88 00 00 00 00 00 00 00 00 00 00
D0 80 00 00 00 88 00 00 00 00 00 00 00 00 00 00 80
E0 00 00 00 88 88 01 00 00 00 01 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 88
DIMM # 2
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 80 08 08 0E 0A 61 40 00 05 30 45 00 82 08 00 00
10 0C 08 38 01 02 00 03 3D 50 50 60 3C 1E 3C 2D 01
20 20 27 10 17 3C 1E 1E 00 06 3C 7F 80 18 22 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 13
40 7F 98 00 00 00 00 00 00 04 32 47 2D 55 44 49 4D
50 4D 00 00 00 00 00 00 00 00 00 00 00 00 08 1C 7E
60 15 1F 2F 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 39 39 55 35 33 31 36 2D 30 33 30 2E 41 30 30 4C
DIMM # 1
SMBus address 0x50
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 1024 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number NT1GT64U8HA0BY-37B
Serial number 56312D83
Manufacturing date Week 47/Year 06
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
AMP yes
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 3.0-3-3-9-12 @ 200 MHz
JEDEC #2 4.0-4-4-12-16 @ 266 MHz
JEDEC #3 5.0-4-4-12-16 @ 266 MHz
AMP profile
Min Cycle time 1.#IO ns (0 MHz)
Max CL -2147483648.0
Min tRP 1.#J ns
Min tRCD 1.#J ns
Min tRAS 1.#J ns
Min tRFC 1.#J ns
AMP timings table CL-tRCD-tRP-tRAS-tRC @ frequency
AMP #1 -2147483648.0--2147483648--2147483648--2147483648--2147483648 @ 0 MHz
DIMM # 2
SMBus address 0x52
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Kingston (7F98000000000000)
Size 2048 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number 2G-UDIMM
Serial number 7E151F2F
Manufacturing date Week 22/Year 08
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
AMP yes
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 3.0-3-3-9-12 @ 200 MHz
JEDEC #2 4.0-4-4-12-16 @ 266 MHz
JEDEC #3 5.0-5-5-15-20 @ 333 MHz
AMP profile
Min Cycle time -1.000 ns (-1 MHz)
Max CL -2147483648.0
Min tRP -1.#J ns
Min tRCD -1.#J ns
Min tRAS 1.#J ns
Min tRFC -1.#J ns
AMP timings table CL-tRCD-tRP-tRAS-tRC @ frequency
AMP #1 -2147483648.0--2147483648--2147483648--2147483648--2147483648 @ -1 MHz
DIMM # 1
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 80 08 08 0E 0A 61 40 00 05 3D 50 00 82 08 00 00
10 0C 04 38 01 02 00 01 3D 50 50 60 3C 1E 3C 2D 80
20 25 37 10 22 3C 1E 1E 00 00 3C 69 80 1E 28 00 51
30 7A 4B 2E 27 21 25 17 34 23 25 00 00 00 00 12 F8
40 7F 7F 7F 0B 00 00 00 00 08 4E 54 31 47 54 36 34
50 55 38 48 41 30 42 59 2D 33 37 42 20 00 06 47 56
60 31 2D 83 88 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 4D 46 30 36 42 32 30 30 31
90 41 00 00 00 00 00 00 32 35 36 33 32 34 32 2D 30
A0 36 A1 00 00 00 00 00 00 01 4E 54 44 32 00 34 2D
B0 31 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 80 00 00 00 88 00 00 00 00 00 00 00 00 00 00
D0 80 00 00 00 88 00 00 00 00 00 00 00 00 00 00 80
E0 00 00 00 88 88 01 00 00 00 01 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 88
DIMM # 2
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 80 08 08 0E 0A 61 40 00 05 30 45 00 82 08 00 00
10 0C 08 38 01 02 00 03 3D 50 50 60 3C 1E 3C 2D 01
20 20 27 10 17 3C 1E 1E 00 06 3C 7F 80 18 22 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 13
40 7F 98 00 00 00 00 00 00 04 32 47 2D 55 44 49 4D
50 4D 00 00 00 00 00 00 00 00 00 00 00 00 08 1C 7E
60 15 1F 2F 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 39 39 55 35 33 31 36 2D 30 33 30 2E 41 30 30 4C
Look at RAM which I think may be problem. I have one 2gb stick which is PC2-5300 (333 MHz)
and 1gb stick which is PC2-4300 (266 MHz)
I think that is problem...Anyway brb in 10 like I said...
- 0useful
- 0not useful
#763. Posted:
Status: Offline
Joined: Jul 15, 201211Year Member
Posts: 958
Reputation Power: 37
no memory errors were detected
- 0useful
- 0not useful
#764. Posted:
Status: Offline
Joined: Mar 19, 201113Year Member
Posts: 1,467
Reputation Power: 65
Status: Offline
Joined: Mar 19, 201113Year Member
Posts: 1,467
Reputation Power: 65
LooseDiamond wrote Hi r00t,
Can you please tell me what is a better motherboard out of these;
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Thanks for your time
Thanks r00t all i require now is a case for around 80GBP
then that's me done (:
- 0useful
- 0not useful
#765. Posted:
Status: Offline
Joined: May 18, 201112Year Member
Posts: 16,360
Reputation Power: 24344
Status: Offline
Joined: May 18, 201112Year Member
Posts: 16,360
Reputation Power: 24344
-Deep- wrote no memory errors were detected
Did you try using using each of your RAM sticks alone?
LooseDiamond wroteLooseDiamond wrote Hi r00t,
Can you please tell me what is a better motherboard out of these;
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Thanks for your time
Thanks r00t all i require now is a case for around 80GBP
then that's me done (:
[ Register or Signin to view external links. ]
All about the Arc Midi.
- 0useful
- 0not useful
#766. Posted:
Status: Offline
Joined: Jul 15, 201211Year Member
Posts: 958
Reputation Power: 37
Status: Offline
Joined: Jul 15, 201211Year Member
Posts: 958
Reputation Power: 37
r00t wrote-Deep- wrote no memory errors were detected
Did you try using using each of your RAM sticks alone?
LooseDiamond wroteLooseDiamond wrote Hi r00t,
Can you please tell me what is a better motherboard out of these;
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Thanks for your time
Thanks r00t all i require now is a case for around 80GBP
then that's me done (:
[ Register or Signin to view external links. ]
All about the Arc Midi.
Ill try now and see if it works. See ya in 10 mins or less
- 0useful
- 0not useful
#767. Posted:
Status: Offline
Joined: Jul 15, 201211Year Member
Posts: 958
Reputation Power: 37
Status: Offline
Joined: Jul 15, 201211Year Member
Posts: 958
Reputation Power: 37
"Did you try using using each of your RAM sticks alone?"
Did NOT work unfortunately
Any other suggestions?
If I cant get it to work on this pc I will just test it on my custom build when all my parts arrive and I am building it next weekend lol
I think it might be the RAM that is the problem. Dont know why. Just have funny feeling.
Did NOT work unfortunately
Any other suggestions?
If I cant get it to work on this pc I will just test it on my custom build when all my parts arrive and I am building it next weekend lol
I think it might be the RAM that is the problem. Dont know why. Just have funny feeling.
- 0useful
- 0not useful
#768. Posted:
Status: Offline
Joined: Mar 10, 201113Year Member
Posts: 28
Reputation Power: 0
Status: Offline
Joined: Mar 10, 201113Year Member
Posts: 28
Reputation Power: 0
Hey R00t,
I wanted to say thanks for helping me with the build and I should be ordering in a day or so. But I have one thing I was wondering about,The case you gave to me to buy is kinda ugly so I was wondering if you could maybe switch it out for a better looking case? I would have picked one out and showed it to you and just have bought the one I picked but the one you gave me came bundled with the power supply. So If you could find a nicer looking case with the same power supply or one that is still modular and come out to the same price. That would be fantastic!
Thanks
-Neon
EDIT: I found the same power supply for $80
[ Register or Signin to view external links. ]
And I found a Case for $70
[ Register or Signin to view external links. ]
Because the total of those 2 came out to the same price of the bundle and the case looks a lot better,
Will these work with the rest of my build?
I wanted to say thanks for helping me with the build and I should be ordering in a day or so. But I have one thing I was wondering about,The case you gave to me to buy is kinda ugly so I was wondering if you could maybe switch it out for a better looking case? I would have picked one out and showed it to you and just have bought the one I picked but the one you gave me came bundled with the power supply. So If you could find a nicer looking case with the same power supply or one that is still modular and come out to the same price. That would be fantastic!
Thanks
-Neon
EDIT: I found the same power supply for $80
[ Register or Signin to view external links. ]
And I found a Case for $70
[ Register or Signin to view external links. ]
Because the total of those 2 came out to the same price of the bundle and the case looks a lot better,
Will these work with the rest of my build?
- 0useful
- 0not useful
#769. Posted:
Status: Offline
Joined: Jul 31, 201013Year Member
Posts: 1,956
Reputation Power: 85
Status: Offline
Joined: Jul 31, 201013Year Member
Posts: 1,956
Reputation Power: 85
Hey Root, I was about to order a custom buidl your partner made me,
would [ Register or Signin to view external links. ] be better then
[ Register or Signin to view external links. ]
and would it work? because number 2 is like 55 and number 1 is like 80. would it fit in [ Register or Signin to view external links. ] build?
would [ Register or Signin to view external links. ] be better then
[ Register or Signin to view external links. ]
and would it work? because number 2 is like 55 and number 1 is like 80. would it fit in [ Register or Signin to view external links. ] build?
- 0useful
- 0not useful
#770. Posted:
Status: Offline
Joined: Nov 11, 201211Year Member
Posts: 90
Reputation Power: 4
Status: Offline
Joined: Nov 11, 201211Year Member
Posts: 90
Reputation Power: 4
Hey when am I getting my build? I made a request and everyone after me is done.
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.