Tutorials Navigation

Tutorials :: New :: Popular :: Top Rated

Show Search Options

Search in categories

(Hold the CTRL/CMD key to select multiple categories)

Tutorials: 18,326 Categories: 12

Total Tutorial Views: 41,447,734

How to disassemble a ps3 for cleaning(Phat PS3)

Tutorial Name: How to disassemble a ps3 for cleaning(Phat PS3)  

Category: PlayStation 3 Tutorials

Submitted By: Island-Time

Date Added:

Comments: 0

Views: 13,256

Related Forum: PlayStation Forum

Share:

    1-Disconnect the PS3. Before opening the system up, make sure that you have disconnected the power cable and the video cable, as well as anything plugged into the USB ports. Like working with any other piece of sensitive electronics, ground yourself before working on the innards.
    You can use an antistatic wrist strap to keep yourself grounded, or touch a screw on an active light switch.
    2-Remove the hard drive. Before you open the case, you will need to remove the hard drive. Luckily, the hard drive on the PS3 is fairly simple to remove. Remove the HDD cover on the left side of the PS3. You will need to unscrew a blue screw that is very easy to strip, so be careful when unscrewing it. Pull the hard drive straight out once you remove the screw.
    While you are looking at this side, remove the sticker towards the top of the case to reveal a Torx screw. You will need a Torx screwdriver (star) to remove this screw.
    Removing the sticker will void any warranty you have on your PlayStation.
    3-Remove the top panel. Once the Torx screw has been removed, you can slide the top panel off of the PlayStation. This will reveal the top shell which is secured by nine screws around the edge. Some of the screws are identified by arrows printed on the plastic. Remove these screws and set them aside.
    4-Find the locking tabs. There are two tabs that lock in the shell. These can be found at the back of the unit. Push them in at the same time and gently lift the shell up. Be careful, as the top is connected to the hardware on the bottom with ribbons. These ribbons are very fragile.
    Gently disconnect the ribbon cable and set it to the side for now.
    5-Remove the card reader. Find the plastic tabs holding the card reader in place. Move the tabs, and you can pull the card reader out of the unit. Carefully detach any ribbons.
    6-Remove the power supply. The power supply is the silver or black box next to the Blu-ray drive. Remove the five screws that hold in the power supply. Detach the plugs on both sides of the power supply. Pull the power supply directly out of the unit
    7-Remove the wireless card. This is located on the same side of the unit as the power supply. There are four screws and a ribbon connecting the card to the unit.
    Disconnect the Blu-ray drive. There shouldnt be any screws holding it in at this point, but it will be connected by a plug and a ribbon cable. Disconnect both of these and lift the drive out of the PlayStation.
    8-Remove the Power/Reset circuit board. This is a tiny board located at the front edge of the PlayStation. It has four screws and a tab that needs to be removed before you can disconnect the board. It is connected with a small ribbon.
    9-Remove the motherboard assembly. There will be seven screws remaining around the edge of the metal plate. Remove these so that you will be able to pull the motherboard assembly out of the case. Once the screws are removed, remove the entire motherboard and back panel.
    Grab the back vents and lift up at an angle with both hands. The assembly is deceptively heavy, and dropping it could easily damage the board.
    10-Take the fan out. On the backside of the motherboard assembly, you will see a large fan. Disconnect the cable, and then remove the three screws holding it in. Pull the fan out so that you can clan all of the dust off of it.
    This is all the disassembly you need to do in order to clean out the inside.


Ratings

Current rating: 4.10 by 20 users
Please take one second and rate this tutorial...

Not a Chance
1
2
3
4
5
6
7
8
9
10
 Absolutely

Comments

"How to disassemble a ps3 for cleaning(Phat PS3)" :: Login/Create an Account :: 0 comments

If you would like to post a comment please signin to your account or register for an account.

Related Tutorials