21 wrote Who is recommending "SilentiumPC" parts to you? Or is that part of a pre-built? Either way, an RX 590 does not belong in a $1300-1500 system, unless maybe it includes a nice 4k monitor. I definitely wouldn't go Intel for CPU, but I wouldn't be buying an AMD GPU with this kind of budget since they don't really have anything that competes on the high end.

Assuming the currency is USD? and the budget is anywhere from 1300-1500?
What monitor(s) will you be using with this system?
What else will the system be used for?

Lembaspl wrote For the silentium parts, they were recoommended by the guy on another forums, I guess he just picked those parts in one of the shops in my country, so I guess it is not a pre-built pc.

Lembaspl wrote What do you mean by it not belonging? Is it to weak, strong or simply does not fit with other parts?

Lembaspl wrote The budget is around 1500USD, since its probably the easiest to explain

Lembaspl wrote Peripherals are a separate budget.
Monitor, for now will probably by pretty cheap one, since at the moment I can't really afford a better one. But this will ofcourse be changed in the future, 4k one is not out of the question.

21 wrote
Yeah, if you were in the US those parts likely wouldn't make sense. Availability of those parts will just be better in your country, as well as prices most likely.

The RX 590 would be too low-end for a $1300-1500USD system, but you're not building a $1300-1500USD system since you're in Poland, so the RX 590 may actually make sense. That said, the RX 590 is an RX 580, so you might be better off going with an RX 580 as they tend to be cheaper than the 590 - at least in the UK and US.

21 wrote
It's not. You won't be buying parts in the US, so us recommending a US based parts list would ultimately be pointless. It's not a straight currency conversion since availability in Poland is far different to that of the US, and you'll end up paying more for the same(or very similar) components as you would in the US. So, what is your budget in your currency? It would also be useful if you could give us an idea of shops where you'd be purchasing components, in case it's a bit of a nightmare for us to find somewhere. From a quick Google though, Komputronik looks like the place to buy PC components in Poland?

21 wrote
Well, I wouldn't really go spending $1500 on a system to pair it with a $100ish monitor. Will you be buying a monitor at the same time as the system? If so, what's the budget for the system and a monitor?

21 wrote

Click to View Content

[Minimum post requirement for links]

from Komputronik.pl.

---

For case, NZXT H500 is a good middle ground but it's not on stock on Komputronik's website. Morele seem to have the NZXT H500 in stock at a similar price to the P350X on Komputronik, so you can get the H500 from Morele instead if you want. The P350X is a good budget case as well, so honestly just pick whichever you prefer the look of.

For PSU, stick with the Corsair Vengeance. It's technically only rated as 80+ Bronze, but it would easily pass as Gold rated as it's a stellar quality unit. It's also very well priced.

For SSD, I'd just stick with an 860 EVO tbh. You can find some really cheap budget 480-512GB SSD's, but the 860 EVO is priced well and is a great SSD. If you want something cheaper though, I'd get a Crucial BX500;
[Minimum post requirement for links]
I also added a 2TB HDD, since I assume you'll want more than just the 500GB SSD. You can drop the 2TB hard drive if you've already got HDD(s) or don't need more than the 500GB SSD.

For RAM, Morele have some cheaper RAM it looks like, so one of these kits might be worth it over the G.Skill kit from Komputronik;
[Minimum post requirement for links]
[Minimum post requirement for links]
[Minimum post requirement for links]

For GPU, the RX 590 seems to be priced about the same as an 8GB RX 580 anyway, so if you want an 8GB variant over 4GB, then I'd just grab an RX 590 for around 1200zl. I just included a 4GB RX 580 as your baseline here really. Your next step up is an RTX 2060, which will set you back around 1600-1700zl minimum. The RTX 2060 is quite a substantial increase in performance over an RX 580/590 though.

For CPU, the R7 1700x is a good bit cheaper than an R7 2700, only reason I went with the 1700x. That said, you'll need an aftermarket cooler for the 1700x which closes the price gap. You'd end up with a better cooler than the stock one that comes with the R7 2700, but the R7 2700 is capable of slightly higher clock speeds than a 1700x if you're going to overclock. If you do decide to go with the 1700x, SilentiumPC cooler's do actually seem reasonably priced, so one of those might not be a bad shout;
[Minimum post requirement for links]
[Minimum post requirement for links]
or this Be Quiet! cooer;
[Minimum post requirement for links]
Alternatively, if you want a cooler a little more flashy at the cost of some cooling performance;
[Minimum post requirement for links]
[Minimum post requirement for links]

Lastly, I'd definitely be aiming for pretty much anything better than a 1080p monitor at this point. If that means grabbing an RX 580/590 over an RTX 2060 or something, then it'll probably be worth it.

Lembaspl wrote For the case, I will not lie, I don't really care that much about how it looks. Is there really such a big performance/size difference between those which you sent and the one I previously mentioned? Its over 100zl which is pretty big difference considering it is only a case.

Lembaspl wrote PSU I suppose you gave me a better one which I appreciate.

Lembaspl wrote For SSD, unless there is really a huge difference between the performance, I'd rather get the cheaper one. HDD will be probably added, but later I guess.

Lembaspl wrote For the ram, I'd rather prefer it being in 2 modules instead of 4, since there might be a probablity that I will have to add some extra in the future. That leaves
https://www.morele.net/pamiec-g-skill-sniper-x-ddr4-32gb-3000mhz-cl16-f4-3000c16d-32gsxwb-1762915/
and the one I posted with a pretty big price difference (the one you sent is currently on sale, so it will get back to basic price pretty soon). Is the difference woth it?

Lembaspl wrote I assume that the GPU that I posted should be pretty good then? From what I see it seems to be quite more powerful than the 580one, and since its one of the most expensive parts I'd rather not have to change it in the nearest future.

Lembaspl wrote As for the processor, this is the part that aside from RAM I need the best performance from (based on the fact that I will focus on multiboxing). I don't really mind paying slightly more for it if the performance is there.
From what I understand with my pretty bad IT skills, R7 2700 seems to have smaller base speed than R7 1700 but can allow for higher overclocking, right? If then, the most important thing is its performance, with long times of high demand on it, what do you suggest? Getting the slightly more expensive 2700 and clocking it in the middle, or buying the 1700 and going max?
I assume that it would be safer to purchase additional cooling anyway, just to be safe?

21 wrote Other than the components you'll be able to fit in a case, no, you absolutely won't see any performance difference between cases. However, super cheapo budget cases are substantially lower quality, and that will absolutely be noticeable. The Eclipse P350x and NZXT H500 are both still fairly budget cases that you can easily fit within the budget, but they're of reasonable quality. Also, when you think about it, a 100zl increase in price with your budget, is a 2% increase in price of the system overall, definitely worth it IMO.

Lembaspl wrote 1. Is the cheaper case (the one in the link) able to fit all the parts from the list? Would I be able to add DVD drive there without problems? I would prefer this cheap one, but if there really isn't any other options I might go for the more expensive ones.

Lembaspl wrote 2. Ignoring looks, can the RAM be this one? Its the cheapest one so far so I'm fine with its looks.

Lembaspl wrote 3. I decided on the R7 2700, because if there is a need for stronger power I can boost it slightly higher than R7 1700 instead of changing it to the stronger one. Is that ok?

Lembaspl wrote 4. Is the cooling ok? Should I buy any other cooling stuff?

Lembaspl wrote 5. IF the shop doesn't have the motherboard that you suggested, or if the price / cash availability changed drastically, would going back to the first one be bad idea? Or the performance is so much better that it is worth to keep it? I'd rather prefer yours over the old one, but lets just ask just in case.

Lembaspl wrote 6. Overall, do you think that those parts will work well together? I would really not want them to fail just because they don't fit well together.

Lembaspl wrote 7. Do I need to buy anything else for the assembly process? Cables or anything along those lines?