You are viewing our Forum Archives. To view or take place in current topics click here.
Decapping xbox 360 cpu
Posted:
Decapping xbox 360 cpuPosted:
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
Okay, so I know it is possible to dump a nand off of any console(including those past the 7XXX series). I also know that this nand dump is just about useless without the cpu key that can be found one of 3 ways.
1) Get it through an unsigned bootloader (XeLL)
2) Brute force it (a 16 byte key? I don't think so)
3) Decap the processor and view the fuse sets under a microscope
Now if method 3 is a legitimate method to recover your cpu key wouldn't you be able to lift kvs of of dead, updated consoles. I guess my question is how much of a stretch is method 3 and is it even possible. I have a dead opus board to experiment on and i was wondering how powerful of tools i would need to pull it off.
Last edited by c0dcoders ; edited 1 time in total
1) Get it through an unsigned bootloader (XeLL)
2) Brute force it (a 16 byte key? I don't think so)
3) Decap the processor and view the fuse sets under a microscope
Now if method 3 is a legitimate method to recover your cpu key wouldn't you be able to lift kvs of of dead, updated consoles. I guess my question is how much of a stretch is method 3 and is it even possible. I have a dead opus board to experiment on and i was wondering how powerful of tools i would need to pull it off.
Last edited by c0dcoders ; edited 1 time in total
#2. Posted:
Status: Offline
Joined: Jan 17, 201113Year Member
Posts: 2
Reputation Power: 0
Status: Offline
Joined: Jan 17, 201113Year Member
Posts: 2
Reputation Power: 0
De-capping the Cpu would be next to impossible you need well over one hundred thousand dollars worth of equipment to be able to be successful with that Not to mention you would also need A Rework station to even get the Cpu off
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
xchucknorrisx wrote De-capping the Cpu would be next to impossible you need well over one hundred thousand dollars worth of equipment to be able to be successful with that Not to mention you would also need A Rework station to even get the Cpu off
Well it wasn't exactly my plan of action to go out and buy all the equipment I need to accomplish this. My point being in theory what sort of equipment would you need?
P.S. I have access to a rework station thankyouverrymuch
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Dec 23, 201013Year Member
Posts: 20
Reputation Power: 0
You're sorta close...You can dump the nand on any console but it must be pre 7371 for you to be able to boot xell on it to get cpu key..
You can lift a exploitable cpu(from a dead board) and reball on a donor board(working board/updated),reflash exploitable nand over and you can then write xell to get cpu...
Then you have a working exploitable console, not an updated one...
It's going to take more than a rework station to pull it off. Even then, the skilled are only capable of pulling it off, it's not an easy task at all..
You can lift a exploitable cpu(from a dead board) and reball on a donor board(working board/updated),reflash exploitable nand over and you can then write xell to get cpu...
Then you have a working exploitable console, not an updated one...
It's going to take more than a rework station to pull it off. Even then, the skilled are only capable of pulling it off, it's not an easy task at all..
- 0useful
- 0not useful
#5. Posted:
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
nitz0h4x wrote You're sorta close...You can dump the nand on any console but it must be pre 7371 for you to be able to boot xell on it to get cpu key..
You can lift a exploitable cpu(from a dead board) and reball on a donor board(working board/updated),reflash exploitable nand over and you can then write xell to get cpu...
Then you have a working exploitable console, not an updated one...
It's going to take more than a rework station to pull it off. Even then, the skilled are only capable of pulling it off, it's not an easy task at all..
Thats my point, I don't want to revive this board what im interested in is lifting the cpu key off the non-exploitable cpu via methods other than xell.
- 0useful
- 0not useful
#6. Posted:
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
*cough cough* bumb *couch*
- 0useful
- 0not useful
#7. Posted:
Status: Offline
Joined: Jul 20, 201013Year Member
Posts: 578
Reputation Power: 22
Status: Offline
Joined: Jul 20, 201013Year Member
Posts: 578
Reputation Power: 22
c0dcoders wrotenitz0h4x wrote You're sorta close...You can dump the nand on any console but it must be pre 7371 for you to be able to boot xell on it to get cpu key..
You can lift a exploitable cpu(from a dead board) and reball on a donor board(working board/updated),reflash exploitable nand over and you can then write xell to get cpu...
Then you have a working exploitable console, not an updated one...
It's going to take more than a rework station to pull it off. Even then, the skilled are only capable of pulling it off, it's not an easy task at all..
Thats my point, I don't want to revive this board what im interested in is lifting the cpu key off the non-exploitable cpu via methods other than xell.
if theres anything i can do to help just message me
- 0useful
- 0not useful
#8. Posted:
Status: Offline
Joined: Aug 01, 201013Year Member
Posts: 3,516
Reputation Power: 160
Status: Offline
Joined: Aug 01, 201013Year Member
Posts: 3,516
Reputation Power: 160
I don't think you understand...
You need to get xell, other methods, you cannot do...
I'm not talking about reviving the board, just removing the cpu from it and placing on a working board...
You need to get cpu key and you need xell, end of story..
You need to get xell, other methods, you cannot do...
I'm not talking about reviving the board, just removing the cpu from it and placing on a working board...
You need to get cpu key and you need xell, end of story..
- 0useful
- 0not useful
#9. Posted:
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
Status: Offline
Joined: May 30, 201013Year Member
Posts: 195
Reputation Power: 7
nitz0 wrote I don't think you understand...
You need to get xell, other methods, you cannot do...
I'm not talking about reviving the board, just removing the cpu from it and placing on a working board...
You need to get cpu key and you need xell, end of story..
Why is everyone so hooked on xell. For christ sakes stretch your mind a bit. There is never only one way to do something.
- 0useful
- 0not useful
#10. Posted:
Status: Offline
Joined: Aug 01, 201013Year Member
Posts: 3,516
Reputation Power: 160
Status: Offline
Joined: Aug 01, 201013Year Member
Posts: 3,516
Reputation Power: 160
Of course there are but you are no way by any means capable of doing that...
You haven't even lifted a chip yet or even reballed and you want to get the cpu key off the cpu bga?
If I thought you were capable of doing it, I would say go for it but considering you're asking how to on ttg, that tells me no..
You haven't even lifted a chip yet or even reballed and you want to get the cpu key off the cpu bga?
If I thought you were capable of doing it, I would say go for it but considering you're asking how to on ttg, that tells me no..
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.