These replies are making this way harder then needed to be

Update the retail side

Redump the bands and build new updflash Switch to rgh side and rewrite the new updflash.bin


Before going on line on the rgh side flash a New Kv to rgh side so you do not banned the retail side


Shouldn't take any longer then 10 minutes

With a demon. Install

Rodent_Modz wrote These replies are making this way harder then needed to be

Update the retail side

Redump the bands and build new updflash Switch to rgh side and rewrite the new updflash.bin


Before going on line on the rgh side flash a New Kv to rgh side so you do not banned the retail side


Shouldn't take any longer then 10 minutes

With a demon. Install

He is unable to get a working dump, pretty sure that's the issue

Crippy wrote

Rodent_Modz wrote These replies are making this way harder then needed to be

Update the retail side

Redump the bands and build new updflash Switch to rgh side and rewrite the new updflash.bin


Before going on line on the rgh side flash a New Kv to rgh side so you do not banned the retail side


Shouldn't take any longer then 10 minutes

With a demon. Install

He is unable to get a working dump, pretty sure that's the issue

It's a dual nand if he dumps new set of bands from the updated retail side it will work!!

Rodent_Modz wrote

Crippy wrote

Rodent_Modz wrote These replies are making this way harder then needed to be

Update the retail side

Redump the bands and build new updflash Switch to rgh side and rewrite the new updflash.bin


Before going on line on the rgh side flash a New Kv to rgh side so you do not banned the retail side


Shouldn't take any longer then 10 minutes

With a demon. Install

He is unable to get a working dump, pretty sure that's the issue

It's a dual nand if he dumps new set of bands from the updated retail side it will work!!

I think that's where he is confused then. How would he go about dumping the retail side?

Crippy wrote

Rodent_Modz wrote

Crippy wrote

Rodent_Modz wrote These replies are making this way harder then needed to be

Update the retail side

Redump the bands and build new updflash Switch to rgh side and rewrite the new updflash.bin


Before going on line on the rgh side flash a New Kv to rgh side so you do not banned the retail side


Shouldn't take any longer then 10 minutes

With a demon. Install

He is unable to get a working dump, pretty sure that's the issue

It's a dual nand if he dumps new set of bands from the updated retail side it will work!!

I think that's where he is confused then. How would he go about dumping the retail side?

On the Demon dual nand it has a USB port to be able to read and write the nand only need a usb cable and jrunner reads the nand in half the time as a nand x


This is if the demon dual nand was installed correctly

If your helping him and need help with this please contact me

Rodent_Modz wrote

Crippy wrote

Rodent_Modz wrote

Crippy wrote

Rodent_Modz wrote These replies are making this way harder then needed to be

Update the retail side

Redump the bands and build new updflash Switch to rgh side and rewrite the new updflash.bin


Before going on line on the rgh side flash a New Kv to rgh side so you do not banned the retail side


Shouldn't take any longer then 10 minutes

With a demon. Install

He is unable to get a working dump, pretty sure that's the issue

It's a dual nand if he dumps new set of bands from the updated retail side it will work!!

I think that's where he is confused then. How would he go about dumping the retail side?

On the Demon dual nand it has a USB port to be able to read and write the nand only need a usb cable and jrunner reads the nand in half the time as a nand x


This is if the demon dual nand was installed correctly

I see now. I linked him a tutorial how to do it through the demon but he could not get the drivers to install for him. Hopefully this info will help him out. If he's on windows 10 that's why he's having issues with the drivers I imagine.

Thanks for the info

Crippy wrote

Rodent_Modz wrote

Crippy wrote

Rodent_Modz wrote

Crippy wrote

Rodent_Modz wrote These replies are making this way harder then needed to be

Update the retail side

Redump the bands and build new updflash Switch to rgh side and rewrite the new updflash.bin


Before going on line on the rgh side flash a New Kv to rgh side so you do not banned the retail side


Shouldn't take any longer then 10 minutes

With a demon. Install

He is unable to get a working dump, pretty sure that's the issue

It's a dual nand if he dumps new set of bands from the updated retail side it will work!!

I think that's where he is confused then. How would he go about dumping the retail side?

On the Demon dual nand it has a USB port to be able to read and write the nand only need a usb cable and jrunner reads the nand in half the time as a nand x


This is if the demon dual nand was installed correctly

I see now. I linked him a tutorial how to do it through the demon but he could not get the drivers to install for him. Hopefully this info will help him out. If he's on windows 10 that's why he's having issues with the drivers I imagine.

Thanks for the info

Should work fine on windows 10 I edited my last post. But if you are helping him and need help please contact me

You have to disable all kinds of security in windows 10 to install the jrunner drivers, at least I did anyway. I just linked him some documentation but I will send him your way if he messages me.

Crippy wrote

Click to View Content

Rodent_Modz wrote

Crippy wrote

Rodent_Modz wrote

Crippy wrote

Rodent_Modz wrote

Crippy wrote

Rodent_Modz wrote These replies are making this way harder then needed to be

Update the retail side

Redump the bands and build new updflash Switch to rgh side and rewrite the new updflash.bin


Before going on line on the rgh side flash a New Kv to rgh side so you do not banned the retail side


Shouldn't take any longer then 10 minutes

With a demon. Install

He is unable to get a working dump, pretty sure that's the issue

It's a dual nand if he dumps new set of bands from the updated retail side it will work!!

I think that's where he is confused then. How would he go about dumping the retail side?

On the Demon dual nand it has a USB port to be able to read and write the nand only need a usb cable and jrunner reads the nand in half the time as a nand x


This is if the demon dual nand was installed correctly

I see now. I linked him a tutorial how to do it through the demon but he could not get the drivers to install for him. Hopefully this info will help him out. If he's on windows 10 that's why he's having issues with the drivers I imagine.

Thanks for the info

Should work fine on windows 10 I edited my last post. But if you are helping him and need help please contact me

You have to disable all kinds of security in windows 10 to install the jrunner drivers, at least I did anyway. I just linked him some documentation but I will send him your way if he messages me.

Tutorial is on Team Xecuter and updates how to install for windows 10. . Like I said if installed properly on console also he will need drivers for the demon to recognize in jrunner

you going to need to crack it or original version