UMG wrote So I've been using my RGH for a little while now with no problems but no when ever i turn it on, i wait like 20 min and it still won't boot. I have a Trinity RGH2 on newest dash

Do you have the original NAND? If so, place the updflash.bin on a USB stick and turn the xbox on by pressing the eject button (booting into XeLL) It should say something about finding an updflash.bin on the memory stick and that it is flashing the NAND. let it do that and restart the console.

-Skittle wrote

UMG wrote So I've been using my RGH for a little while now with no problems but no when ever i turn it on, i wait like 20 min and it still won't boot. I have a Trinity RGH2 on newest dash

Do you have the original NAND? If so, place the updflash.bin on a USB stick and turn the xbox on by pressing the eject button (booting into XeLL) It should say something about finding an updflash.bin on the memory stick and that it is flashing the NAND. let it do that and restart the console.

does it have to be the original nand?

UMG wrote

-Skittle wrote

UMG wrote So I've been using my RGH for a little while now with no problems but no when ever i turn it on, i wait like 20 min and it still won't boot. I have a Trinity RGH2 on newest dash

Do you have the original NAND? If so, place the updflash.bin on a USB stick and turn the xbox on by pressing the eject button (booting into XeLL) It should say something about finding an updflash.bin on the memory stick and that it is flashing the NAND. let it do that and restart the console.

does it have to be the original nand?

If you dont have the original NAND then you could try a recent one that you have dumped but the original one would work as it has not been changed therefore could not have any problems.

Try turning it on then pushing the eject button, if it boots remove the plugin you last put on

UMG wrote

-Skittle wrote

UMG wrote So I've been using my RGH for a little while now with no problems but no when ever i turn it on, i wait like 20 min and it still won't boot. I have a Trinity RGH2 on newest dash

Do you have the original NAND? If so, place the updflash.bin on a USB stick and turn the xbox on by pressing the eject button (booting into XeLL) It should say something about finding an updflash.bin on the memory stick and that it is flashing the NAND. let it do that and restart the console.

does it have to be the original nand?

No, just any copy of your nand on the 16767 (newest daah), if its not on the newest, you will brick your console

I don't know what to do. I clicked eject and XeLL isn't coming up wtf

UMG wrote I don't know what to do. I clicked eject and XeLL isn't coming up wtf

That could mean you bricked your console...

UNSC wrote

UMG wrote I don't know what to do. I clicked eject and XeLL isn't coming up wtf

That could mean you bricked your console...

i literally did nothing tho.... the last thing i did was turn on pingpatch

UMG wrote I don't know what to do. I clicked eject and XeLL isn't coming up wtf

Bottom line is if you can't even boot xell your console is bricked until it can be hardware flashed if it can be recovered even then.

If you've got soldering skills and a nand programmer then you'll need to get that out, if you don't start tallking to console makers to find someone to send it off too.