You are viewing our Forum Archives. To view or take place in current topics click here.
Xbox 360 slim wont boot (trinity)
Posted:
Xbox 360 slim wont boot (trinity)Posted:
Status: Offline
Joined: Jun 30, 201310Year Member
Posts: 451
Reputation Power: 18
Status: Offline
Joined: Jun 30, 201310Year Member
Posts: 451
Reputation Power: 18
Title says most of it, it simply wont boot it beeps like it normally should. but i need some tips to get it to work again. heres what i have done before:
Edit: i missed a part but the green light doesnt even light up on the ROL faceplate or on the power brick
1. Made sure all the cords are secured and connected properly
2. tried moving it to a new location
3. new hdmi cord
4. checked all the USB ports for any prongs that are broken
5. opened it and cleaned any dust in the fans and the motherboard
6. made sure the internal cords are in place
7. tried a new power brick
8. checked most of the motherboard for any loose or faulty parts that shouldnt be in their location
im running slim on ideas (no pun intended) but i need some more tips on getting it to boot. i had it boot one time earlier and it never booted again.
Edit: i missed a part but the green light doesnt even light up on the ROL faceplate or on the power brick
1. Made sure all the cords are secured and connected properly
2. tried moving it to a new location
3. new hdmi cord
4. checked all the USB ports for any prongs that are broken
5. opened it and cleaned any dust in the fans and the motherboard
6. made sure the internal cords are in place
7. tried a new power brick
8. checked most of the motherboard for any loose or faulty parts that shouldnt be in their location
im running slim on ideas (no pun intended) but i need some more tips on getting it to boot. i had it boot one time earlier and it never booted again.
#2. Posted:
Status: Offline
Joined: Mar 22, 201410Year Member
Posts: 528
Reputation Power: 20
Status: Offline
Joined: Mar 22, 201410Year Member
Posts: 528
Reputation Power: 20
1. boot then push eject button right away
2. boot through xell
3. if u flashed a kv
and then it wouldnt turn on it means u have bad nand flash so look at projimmys form on how to fix it hope that helped
-Ezlobbiesv2
2. boot through xell
3. if u flashed a kv
and then it wouldnt turn on it means u have bad nand flash so look at projimmys form on how to fix it hope that helped
-Ezlobbiesv2
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Jun 30, 201310Year Member
Posts: 451
Reputation Power: 18
Status: Offline
Joined: Jun 30, 201310Year Member
Posts: 451
Reputation Power: 18
EzLobbiesV2 wrote 1. boot then push eject button right away
2. boot through xell
3. if u flashed a kv
and then it wouldnt turn on it means u have bad nand flash so look at projimmys form on how to fix it hope that helped
-Ezlobbiesv2
no no no no no no no no no no no, i added a part but no HDD is connected and no power light shows up. its got nothing to do with that....
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.