You are viewing our Forum Archives. To view or take place in current topics click here.
RAM Not Fitting? Will +Rep
Posted:

RAM Not Fitting? Will +RepPosted:

RSK
  • Powerhouse
Status: Offline
Joined: Jun 10, 201310Year Member
Posts: 430
Reputation Power: 30
Status: Offline
Joined: Jun 10, 201310Year Member
Posts: 430
Reputation Power: 30
So I took my pc apart for it's bi-weekly cleaning and the RAM will not fit in the slots. When I lock it, it's extremely wobbly and falls right out. It seems to not be going in all the way. I am putting it in correctly and have tried all RAM slots and none work (same result.) I sadly can't provide pictures as my phone's camera is broken and my pc isn't on working order. Any suggestions? Will +Rep
#2. Posted:
r00t
  • Administrator
Status: Offline
Joined: May 18, 201112Year Member
Posts: 16,361
Reputation Power: 24344
Status: Offline
Joined: May 18, 201112Year Member
Posts: 16,361
Reputation Power: 24344
Look in the slot and make sure nothing is deformed, broken, or in the way. If you have another slot that were not being used, see if it works.

What's more likely is that you are not pushing hard enough. It takes more pressure than you'd think to get the sticks in the slot. Be careful to only push STRAIGHT DOWN. I push down with both thumbs on both sides of the top of the sticks. Also make sure the latches go into the small notches on the ends of the sticks.
#3. Posted:
RSK
  • Powerhouse
Status: Offline
Joined: Jun 10, 201310Year Member
Posts: 430
Reputation Power: 30
Status: Offline
Joined: Jun 10, 201310Year Member
Posts: 430
Reputation Power: 30
Nevermind, just wasn't applying enough pressure.
#4. Posted:
RSK
  • Powerhouse
Status: Offline
Joined: Jun 10, 201310Year Member
Posts: 430
Reputation Power: 30
Status: Offline
Joined: Jun 10, 201310Year Member
Posts: 430
Reputation Power: 30
r00t wrote Look in the slot and make sure nothing is deformed, broken, or in the way. If you have another slot that were not being used, see if it works.

What's more likely is that you are not pushing hard enough. It takes more pressure than you'd think to get the sticks in the slot. Be careful to only push STRAIGHT DOWN. I push down with both thumbs on both sides of the top of the sticks. Also make sure the latches go into the small notches on the ends of the sticks.


I fixed it before reading that, I needed to apply more pressure. Regardless, thank for helping, +Rep for you sir.
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.