You are viewing our Forum Archives. To view or take place in current topics click here.
How To Flash A benq Drive....
Posted:
How To Flash A benq Drive....Posted:
Status: Offline
Joined: Jul 07, 201013Year Member
Posts: 1,319
Reputation Power: 72
Status: Offline
Joined: Jul 07, 201013Year Member
Posts: 1,319
Reputation Power: 72
How To Flash Your Xbox 360 Benq Drive~ easy TuT.
White wires and empty space = Benq THIS IS THE DRIVE THIS TUT IS
FOR
If it looks like the BenQ but with a Yellow wire, it is a Lite-On
Requirements
What you need:
1.A BenQ drive *duh!!!*
2.DosFlash 1.3b
[ Register or Signin to view external links. ]
3.Your iXtreme Firmware files get these off Xbins and PATCH THEM TO YOUR FIRMWARE.... putting these on your drive without your drive key will result in a non working drive
AUTO-XBINS:
[ Register or Signin to view external links. ]
4.PCI Sata card with VIA6421 chipset *you can find them off Ebay* that specific chipset isnt needed per se, BUT you DO want either VIA or NFORCE, or else it wont work.
5.USB flash drive
6.HP boot disk maker -
[ Register or Signin to view external links. ]
7.Windows 98 boot files
[ Register or Signin to view external links. ]
8.The tools to open your 360!!!
Tutorial
Step 1:
Make your USB boot disk using the HP boot program and the windows 98 files
[ Register or Signin to view external links. ]
You can also make a boot disk with a floppy disc, but it isnt as reliable, so I wont go into it
Copy the contents from the DosFlash 16 folder into your root directory of the flash drive
Before you go any further, write down the port number for the first port of your Sata card, it will be the first port number in your device manager for it.
Step 2:
Open your 360 using any available guides, or contact me and I will walk you through it if you want personalized help
Step 3:
Power down your computer and connect the 360 drive to the first port on your sata card *On a PCI card this port is labeled 1 and is the one on the opposite end of the outside of the PCI slot*
Touch the metal cases of the 360 and computer to make sure it is grounded
[ Register or Signin to view external links. ]
Unplug all IDE and SATA cables from your computer other than the one going into your 360 to ensure you dont accidentally flash another item
Step 4:
Connect your USB drive and then, Boot up your computer and go into the boot menu, and boot from the USB drive.
Make sure your 360 has the cables plugged in, but AV doesnt have to go anywhere
When you get into dos it should look something like this:
[ Register or Signin to view external links. ]
Run the DosFlash command to read the original firmware
[ Register or Signin to view external links. ]
Anser Y to next question
Prop your 360 faceplate like it was on the 360, and turn on the 360 for 5 seconds, if it doesnt begin reading, turn it off for 5 seconds, then turn it on and repeat until it reads the firmware, might Take 5+ tries...
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Turn off computer and 360 and plug your IDE/Sata cables back in, and boot back into Xp.
Find the firmware file on your USB drive, it will be called *Orig.bin* Make sure this file is 256kb..If its any smaller or any larger go re-read the firmware until you get a 256kb sized one. Back it up, now back it up in a new folder, then back it up in anther folder, then upload it to rapidshare, then put it onto another computerYou get the idea? MAKE SURE YOU NEVER LOOSE THAT FILE !! SOO IMPORTANTTT!!
TO MAKE I XTREME FIRMWARE FOLLOW THIS ...
Make sure to put ix15.bin on the root of your usb drive
Turn off your computer and get it set u for the 360 again *unplug IDE/Sata cables and hook 360 into the sata card, then boot off your USB drive again
Run the erase command for DosFlash, C:>DosFlash e (port #) 1 a0 1 4 D8 0
[ Register or Signin to view external links. ]
Answer Y to the question, and then power the 360 on for 5 seconds, and if it doesnt begin erasing turn it off, wait, and turn it back on, it should erase after like, 2-3 tried max.
[ Register or Signin to view external links. ]
Shut down 360 and computer, and reboot computer into Dos again Use the command to write your firmware
C:>DosFlash w (port #) 1 a0 1 4 c:/ix15.bin 0
remember the ix14.bin will be ix15.bin if you are using iXtreme 1.5 which you SHOULD be using
Answer Y to the next question and turn on the 360, it should write on the first try, but shuldnt take more than 3 ever, if it does, shut off computer, check connections, and try again.
[ Register or Signin to view external links. ]
Shut down computer and 360
Disconnect 360 from computer and reconnect all original computer connections
Re-assemble computer and 360
Plug 360 into your TV and turn it on, insert a backup and enjoy
If the file does not have a link, odds are it is on Xbins.
IF THIS TUT HELPED THANK IT =]
White wires and empty space = Benq THIS IS THE DRIVE THIS TUT IS
FOR
If it looks like the BenQ but with a Yellow wire, it is a Lite-On
Requirements
What you need:
1.A BenQ drive *duh!!!*
2.DosFlash 1.3b
[ Register or Signin to view external links. ]
3.Your iXtreme Firmware files get these off Xbins and PATCH THEM TO YOUR FIRMWARE.... putting these on your drive without your drive key will result in a non working drive
AUTO-XBINS:
[ Register or Signin to view external links. ]
4.PCI Sata card with VIA6421 chipset *you can find them off Ebay* that specific chipset isnt needed per se, BUT you DO want either VIA or NFORCE, or else it wont work.
5.USB flash drive
6.HP boot disk maker -
[ Register or Signin to view external links. ]
7.Windows 98 boot files
[ Register or Signin to view external links. ]
8.The tools to open your 360!!!
Tutorial
Step 1:
Make your USB boot disk using the HP boot program and the windows 98 files
[ Register or Signin to view external links. ]
You can also make a boot disk with a floppy disc, but it isnt as reliable, so I wont go into it
Copy the contents from the DosFlash 16 folder into your root directory of the flash drive
Before you go any further, write down the port number for the first port of your Sata card, it will be the first port number in your device manager for it.
Step 2:
Open your 360 using any available guides, or contact me and I will walk you through it if you want personalized help
Step 3:
Power down your computer and connect the 360 drive to the first port on your sata card *On a PCI card this port is labeled 1 and is the one on the opposite end of the outside of the PCI slot*
Touch the metal cases of the 360 and computer to make sure it is grounded
[ Register or Signin to view external links. ]
Unplug all IDE and SATA cables from your computer other than the one going into your 360 to ensure you dont accidentally flash another item
Step 4:
Connect your USB drive and then, Boot up your computer and go into the boot menu, and boot from the USB drive.
Make sure your 360 has the cables plugged in, but AV doesnt have to go anywhere
When you get into dos it should look something like this:
[ Register or Signin to view external links. ]
Run the DosFlash command to read the original firmware
[ Register or Signin to view external links. ]
Anser Y to next question
Prop your 360 faceplate like it was on the 360, and turn on the 360 for 5 seconds, if it doesnt begin reading, turn it off for 5 seconds, then turn it on and repeat until it reads the firmware, might Take 5+ tries...
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Turn off computer and 360 and plug your IDE/Sata cables back in, and boot back into Xp.
Find the firmware file on your USB drive, it will be called *Orig.bin* Make sure this file is 256kb..If its any smaller or any larger go re-read the firmware until you get a 256kb sized one. Back it up, now back it up in a new folder, then back it up in anther folder, then upload it to rapidshare, then put it onto another computerYou get the idea? MAKE SURE YOU NEVER LOOSE THAT FILE !! SOO IMPORTANTTT!!
TO MAKE I XTREME FIRMWARE FOLLOW THIS ...
Make sure to put ix15.bin on the root of your usb drive
Turn off your computer and get it set u for the 360 again *unplug IDE/Sata cables and hook 360 into the sata card, then boot off your USB drive again
Run the erase command for DosFlash, C:>DosFlash e (port #) 1 a0 1 4 D8 0
[ Register or Signin to view external links. ]
Answer Y to the question, and then power the 360 on for 5 seconds, and if it doesnt begin erasing turn it off, wait, and turn it back on, it should erase after like, 2-3 tried max.
[ Register or Signin to view external links. ]
Shut down 360 and computer, and reboot computer into Dos again Use the command to write your firmware
C:>DosFlash w (port #) 1 a0 1 4 c:/ix15.bin 0
remember the ix14.bin will be ix15.bin if you are using iXtreme 1.5 which you SHOULD be using
Answer Y to the next question and turn on the 360, it should write on the first try, but shuldnt take more than 3 ever, if it does, shut off computer, check connections, and try again.
[ Register or Signin to view external links. ]
Shut down computer and 360
Disconnect 360 from computer and reconnect all original computer connections
Re-assemble computer and 360
Plug 360 into your TV and turn it on, insert a backup and enjoy
If the file does not have a link, odds are it is on Xbins.
IF THIS TUT HELPED THANK IT =]
The following 1 user thanked -GooNz- for this useful post:
SupaMeatBoy (11-02-2010)
#2. Posted:
Status: Offline
Joined: Jul 18, 201013Year Member
Posts: 230
Reputation Power: 14
Status: Offline
Joined: Jul 18, 201013Year Member
Posts: 230
Reputation Power: 14
cheers for the time and effort you put into this bro ;)
will try this when the stuff about the new dash ends!
-TH3O-
will try this when the stuff about the new dash ends!
-TH3O-
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Aug 01, 201013Year Member
Posts: 3,516
Reputation Power: 160
Status: Offline
Joined: Aug 01, 201013Year Member
Posts: 3,516
Reputation Power: 160
This is hella old...So much faster/easier way than doing it this way. I can take the console apart and have it flashed in under 4 mins..
JungleFlasher is your best friend...BenQ Unlock-Read-Save-Load CFW-SPOOF-WRITE-OUTRO=Done!
Good effort on posting this tut tho.
JungleFlasher is your best friend...BenQ Unlock-Read-Save-Load CFW-SPOOF-WRITE-OUTRO=Done!
Good effort on posting this tut tho.
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Dec 11, 201013Year Member
Posts: 75
Reputation Power: 2
so if it is a lite- on, would you be able to still flash it? or is it a different firmware?
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.