add you diodes then put freeboot on. you must put jtag wiring in place

oh ok thats pretty kewl, its almost finished

it still red ringed. but the secondary code is 0-0-2-0 now. i installed the original nand but after i didnt install xell to see if it would work but nothing

Try installing xell and see if it works after that.

ok quit you are going to mess it up even worse
when you dump the nand you have no diodes soldered on
after you dump and compare the nands you solder the diodes and bridge wire on
then you put xell on
get cpu key
type that in
create freeBOOT
write freeboot
you are done

If you are using usb there is a very slim chance you get bad nand dumps if you soldered the wires directly in the holes. just use a lot of flux and you will be good to go

xLasers wrote ok quit you are going to mess it up even worse
when you dump the nand you have no diodes soldered on
after you dump and compare the nands you solder the diodes and bridge wire on
then you put xell on
get cpu key
type that in
create freeBOOT
write freeboot
you are done

If you are using usb there is a very slim chance you get bad nand dumps if you soldered the wires directly in the holes. just use a lot of flux and you will be good to go

it makes no difference if you have the diodes on when you dump then nand....
the didodes dont affect then nand dumps

i re installed xell and it is still red ringed. i really have no clue what to do. if someone can help me over teamviewer or what? idk

xViRRuzZ wrote

xLasers wrote ok quit you are going to mess it up even worse
when you dump the nand you have no diodes soldered on
after you dump and compare the nands you solder the diodes and bridge wire on
then you put xell on
get cpu key
type that in
create freeBOOT
write freeboot
you are done

If you are using usb there is a very slim chance you get bad nand dumps if you soldered the wires directly in the holes. just use a lot of flux and you will be good to go

it makes no difference if you have the diodes on when you dump then nand....
the didodes dont affect then nand dumps

that's not what I am saying. you will get red rings if you write xell onto the console then boot it up. it needs the diodes for xell to boot up which i though was what was happening to the op but it looks like he is doing it right