You are viewing our Forum Archives. To view or take place in current topics click here.
Basic Modding Tutorials.
Posted:
Basic Modding Tutorials.Posted:
Status: Offline
Joined: Sep 03, 201112Year Member
Posts: 83
Reputation Power: 3
Status: Offline
Joined: Sep 03, 201112Year Member
Posts: 83
Reputation Power: 3
WatsonHD's Basic Tutorials
I will keep adding tutorials everytime I get a chance so bare with me.
Open up 'Open IV' but Run as Administrator
[ Register or Signin to view external links. ]
Go to 'File' then 'Open' and Locate your Common.rpf
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Scroll down until you see the file 'Handling.dat', right click and click extract it to your desktop
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Now go to your Desktop and Locate the 'Handling.dat' File. Right Click over it, go to open with and select notepad, if it's not in the list go to browse programs and it will be in that list.
[ Register or Signin to view external links. ]
Scroll down until you start the see the Handling Lines like below
[ Register or Signin to view external links. ]
Once you have located the lines, find your desired line you wish to use. Select the line of the car you wish to replace and then paste over it.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Once pasted it should look like or similar to this.
[ Register or Signin to view external links. ]
Once you have finished go to File then save. If it try's to save it as a new file then you need to go to properties then untick the box 'Read Only'[b/]
[ Register or Signin to view external links. ]
Once finished editing all your lines you will need to do the following:
Right click the 'Handling.dat' file.
Go to properties and size.
Check the size is 41,386KB NOT the size on disk.
If it isn't 41,386KB in Size you will also need to do the following.
Every [b]'Symbol, Character, Number, Letter, Key' represents 1KB.
If your file is bigger than 41,386KB You need to count the difference between 41,386KB and the 'File Size' You have. Then Delete that amount of letters. Only delete the letters at the top and the ';' Semicolons can be deleted also.
If your file is smaller than 41,386KB You need to count the difference between the 41,386KB and the 'File Size' You have. Then add that amount of letters. Only add the letters at the top of the file.
Now once you have got it to :
Size:40.4 KB (41,386 bytes)
Size on Disk :44.0 KB (45,056 bytes)[b/].
Open up [b]'Open IV', Right click then replace and replace it with the one you just edited.
Go to file then rebuild, click yes and once it has completed, inject the common.rpf back into your ISO. Burn and Play.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Go to 'File' then 'Open' and Locate your Common.rpf
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Scroll down until you see the file 'Handling.dat', right click and click extract it to your desktop
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Now go to your Desktop and Locate the 'Handling.dat' File. Right Click over it, go to open with and select notepad, if it's not in the list go to browse programs and it will be in that list.
[ Register or Signin to view external links. ]
Scroll down until you start the see the Handling Lines like below
[ Register or Signin to view external links. ]
Once you have located the lines, find your desired line you wish to use. Select the line of the car you wish to replace and then paste over it.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Once pasted it should look like or similar to this.
[ Register or Signin to view external links. ]
Once you have finished go to File then save. If it try's to save it as a new file then you need to go to properties then untick the box 'Read Only'[b/]
[ Register or Signin to view external links. ]
Once finished editing all your lines you will need to do the following:
Right click the 'Handling.dat' file.
Go to properties and size.
Check the size is 41,386KB NOT the size on disk.
If it isn't 41,386KB in Size you will also need to do the following.
Every [b]'Symbol, Character, Number, Letter, Key' represents 1KB.
If your file is bigger than 41,386KB You need to count the difference between 41,386KB and the 'File Size' You have. Then Delete that amount of letters. Only delete the letters at the top and the ';' Semicolons can be deleted also.
If your file is smaller than 41,386KB You need to count the difference between the 41,386KB and the 'File Size' You have. Then add that amount of letters. Only add the letters at the top of the file.
Now once you have got it to :
Size:40.4 KB (41,386 bytes)
Size on Disk :44.0 KB (45,056 bytes)[b/].
Open up [b]'Open IV', Right click then replace and replace it with the one you just edited.
Go to file then rebuild, click yes and once it has completed, inject the common.rpf back into your ISO. Burn and Play.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Open up 'Open IV' but run as administrator
[ Register or Signin to view external links. ]
Go to file then open and locate your Common.rpf
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Once it has opened up, go to text and locate american.gxt. Right click and extract to desktop or your desired folder.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Open up GXT Editor but Run as [b]Administrator.
[ Register or Signin to view external links. ]
Go to file then open [b] and locate your '[b]american.gxt.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Once it has loaded go to search and then find value
i.e I entered in the box 'Rockstar' So search what you want to edit.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
After you have edited it, click off it onto another word in the sections at the bottom right.
Once you done the first one keep click next on the same word and change all of them to the same thing you did the first time.
After you have completed everything, go to file then save.
[ Register or Signin to view external links. ]
Close everything down then go back to 'Open IV' and re-locate your 'American.gxt, then right click and 'replace. Locate your edited version of the 'American.gxt' and replace it with that one.
Go to File, rebuild and click yes.
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
Last edited by WatsonHD ; edited 1 time in total
#2. Posted:
Status: Offline
Joined: Jul 24, 201013Year Member
Posts: 193
Reputation Power: 14
Status: Offline
Joined: Jul 24, 201013Year Member
Posts: 193
Reputation Power: 14
Yep Yep Yep very nice i hope this helps alot of noobs, that have no idea what there doing on GTA
- 1useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Sep 03, 201112Year Member
Posts: 83
Reputation Power: 3
Status: Offline
Joined: Sep 03, 201112Year Member
Posts: 83
Reputation Power: 3
SCM_II_R00TED wrote Yep Yep Yep very nice i hope this helps alot of noobs, that have no idea what there doing on GTA#
Blade now,now dont be mean.
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.