You are viewing our Forum Archives. To view or take place in current topics click here.
Red Ringed (E 74 Error)
Posted:
Red Ringed (E 74 Error)Posted:
Status: Offline
Joined: Jul 23, 201013Year Member
Posts: 30
Reputation Power: 1
Status: Offline
Joined: Jul 23, 201013Year Member
Posts: 30
Reputation Power: 1
Alright so earlier this week I was playing Red Dead Redemption when my xbox started goin crazy. I turned it off then turned it back on. I got one flashing red ring... and some E 74 error. Can anyone help me to fix this because I don't want to have to send it in to microsoft. Thanks
#2. Posted:
Status: Offline
Joined: Aug 06, 201013Year Member
Posts: 3,068
Reputation Power: 141
Status: Offline
Joined: Aug 06, 201013Year Member
Posts: 3,068
Reputation Power: 141
I'm not 100% sure but I think the HANA chip failed on you. It probably will need to be reflowed regardless of what chip it is.
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Sep 28, 201013Year Member
Posts: 839
Reputation Power: 35
Status: Offline
Joined: Sep 28, 201013Year Member
Posts: 839
Reputation Power: 35
do what i did
throw it out the window
pour gas on it n set the b**** on fire
make sure to put it on utube and provide a link
hope this helped
throw it out the window
pour gas on it n set the b**** on fire
make sure to put it on utube and provide a link
hope this helped
- 1useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Dec 19, 201013Year Member
Posts: 128
Reputation Power: 17
Status: Offline
Joined: Dec 19, 201013Year Member
Posts: 128
Reputation Power: 17
Try And Boot It Without The Hardrive
- 0useful
- 0not useful
#5. Posted:
Status: Offline
Joined: Jul 22, 201013Year Member
Posts: 1,697
Reputation Power: 82
Status: Offline
Joined: Jul 22, 201013Year Member
Posts: 1,697
Reputation Power: 82
Might have 2 get reflowed man i have a friend that can do it
- 0useful
- 0not useful
#6. Posted:
Status: Offline
Joined: Apr 09, 200915Year Member
Posts: 4,267
Reputation Power: 1070
Status: Offline
Joined: Apr 09, 200915Year Member
Posts: 4,267
Reputation Power: 1070
Known fixes:
1)If you soldered anything to the mainboard before it occured, whatever you are powering from this point is drawing too much power so get rid of it.Also get rid of everything that you can see that might bridge anything near the GPU.
2) X-Clamp replacement Hybrid - Tighten the GPU screws facing the HANA chip slightly more and make sure to be using a shim
2) X-Clamp replacement Hybrid - Tighten the GPU screws facing the HANA chip slightly more and make sure to be using a shim. Adding an extra shim on each side of the smaller chip dye will help to create more surface against the heatsink and will increase the chances of the error going away for good.
3) If there is a lot of flexing under the GPU, bake the board to unflex it
4) Reflowing GPU and HANA chip
Related Errors:
0022
Description:
This error is caused by a cold solder joint under the GPU, (H)ANA-chip or in between.
Mostly it is one of the outer solder balls on the side facing the (H)ANA chip so a shim increases the chanced of success quite a bit.
Can also be a component that is missing or damaged so look for missing parts near the GPU and the (H)ANA chip.
References:
JBBrack - Extra shim, smaller chip dye
1)If you soldered anything to the mainboard before it occured, whatever you are powering from this point is drawing too much power so get rid of it.Also get rid of everything that you can see that might bridge anything near the GPU.
2) X-Clamp replacement Hybrid - Tighten the GPU screws facing the HANA chip slightly more and make sure to be using a shim
2) X-Clamp replacement Hybrid - Tighten the GPU screws facing the HANA chip slightly more and make sure to be using a shim. Adding an extra shim on each side of the smaller chip dye will help to create more surface against the heatsink and will increase the chances of the error going away for good.
3) If there is a lot of flexing under the GPU, bake the board to unflex it
4) Reflowing GPU and HANA chip
Related Errors:
0022
Description:
This error is caused by a cold solder joint under the GPU, (H)ANA-chip or in between.
Mostly it is one of the outer solder balls on the side facing the (H)ANA chip so a shim increases the chanced of success quite a bit.
Can also be a component that is missing or damaged so look for missing parts near the GPU and the (H)ANA chip.
References:
JBBrack - Extra shim, smaller chip dye
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.