You are viewing our Forum Archives. To view or take place in current topics click here.
iPhone 4 power button jammed! Help please!
Posted:

iPhone 4 power button jammed! Help please!Posted:

Alfred_Morris
  • Challenger
Status: Offline
Joined: Mar 16, 201311Year Member
Posts: 110
Reputation Power: 4
Status: Offline
Joined: Mar 16, 201311Year Member
Posts: 110
Reputation Power: 4
Woke up and it's jammed down. Anybody know how to fix this or will I have to go to apple or RadioShack or something?If so how much you think it will cost and I don't have insurance on my phone. Thanks if you know how to fix this! Last is this normal at all. Has this happened to any of you before?
#2. Posted:
BossHaug
  • Rated Awesome
Status: Offline
Joined: Jun 18, 200914Year Member
Posts: 3,907
Reputation Power: 342
Status: Offline
Joined: Jun 18, 200914Year Member
Posts: 3,907
Reputation Power: 342
This is very, very normal for iPhones 4/4S.

This happens because of the way the button is designed. The button mechanism is 2 metal domes on top of one another. On top of that you have some yellow heat tape with a small black, dot on it. This little black dot is what lets you depress the domes, causing a short at the button base which causes the screen to power on/off.

What happens is this little black, dot just pops off over time. That is the only reason its not depressing.

You can replace it fairly easily. Disassemble your iPhone, take the motherboard out, remove the two screws holding the power button in place and pull it out. Then get a razor blade and slide it under a corner of that yellow heat tape with the dot on it. Then simply apple a new piece of heat tape with the dot on it. You can find it on many parts throughout HTC phones and iPhones or order it.
Here is what you need but you can find it at other sources and off of other parts...
[ Register or Signin to view external links. ]
Please note all you need is that yellow tape with the black dot, if you do repair it dont try and replace that whole mechanism as it is soldered onto the flex cable.



Alternately you can have it repaired fairly cheaply. The store I work at charges $55 to do it but i've heard other places doing it as low as $35.

Don't waste your time taking it to the Apple store, all they will do is put the accessibility dot on your screen.

#3. Posted:
Alfred_Morris
  • Challenger
Status: Offline
Joined: Mar 16, 201311Year Member
Posts: 110
Reputation Power: 4
Status: Offline
Joined: Mar 16, 201311Year Member
Posts: 110
Reputation Power: 4
Alright thanks for helping me out. This helped me out a lot.
#4. Posted:
OhCasp
  • Resident Elite
Status: Offline
Joined: Jul 10, 200914Year Member
Posts: 228
Reputation Power: 10
Status: Offline
Joined: Jul 10, 200914Year Member
Posts: 228
Reputation Power: 10
Settings>General>Accessibility>Assistive Touch - On..
#5. Posted:
Porygon
  • New Member
Status: Offline
Joined: Jun 30, 201310Year Member
Posts: 14
Reputation Power: 0
Status: Offline
Joined: Jun 30, 201310Year Member
Posts: 14
Reputation Power: 0
This happened to my iPod too. This worked for me for a while.

Turn your phone off and where you plug in the lead blow into that. Then at the same time start pressing the button. This works sometimes as it may be dust or dirt in the way that just needs removing. Just try to have a dry mouth as you don't want to put much vapour into the phone. You should be able to start pressing the button again or hear the clicking, if so keep doing it.

If you're worried about getting vapour inside your phone don't try it, but it should be fine.
#6. Posted:
jamieeeee__
  • New Member
Status: Offline
Joined: Mar 25, 201311Year Member
Posts: 37
Reputation Power: 1
Status: Offline
Joined: Mar 25, 201311Year Member
Posts: 37
Reputation Power: 1
if you take it to the apple store they will give you a whole new phone it happened to me on my 4S
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.