Hey guys, Doug here, and today I'm gonna show you how to install XeXMenu 1.1 on your Jtag!

*Remember, not all of the folders I have will have the exact same things that you have, just follow what the tutorial says and you'll have XeXMenu up and running on your Jtag in no time!*

So your gonna need to download the following links:

XeXMenu 1.1: [ Register or Signin to view external links. ]
Xplorer360: [ Register or Signin to view external links. ]

Step One:
Connect your Jtags HDD via Transfer Cable.

Step Two:
Extract the C0DE9999 folder from the XeXMenu File you downloaded.

Step Three:
Open Xplorer360. Once you open it, you should see this:
[ Register or Signin to view external links. ]

Step Four:
Click Drive, Then Highlight Open, then select Harddrive or Memcard. You should now see this:
[ Register or Signin to view external links. ]

Step Five:
Click on partition 3. After clicking Partition 3, you should see the following:
[ Register or Signin to view external links. ]

Step Six:
Now click on Content. After Clicking Content, you should see this:
[ Register or Signin to view external links. ]

Step Seven:
Now Click on the 0000000000000000 Folder. After clicking it, you should see something that looks like this:
[ Register or Signin to view external links. ]

Step Eight:
Now Drag the C0DE999 Folder you extracted into the 000000000000000 folder.

After dragging the C0DE999 folding onto your HDD, you are now ready to put it back on your Jtag and start Modding!