You have to update your dash, if you have a USB, place a blank launch.ini on it and then boot the console with the USB in it. That should work to get you onto your console

ItsSno wrote

Fly_Modz wrote

ItsSno wrote

Fly_Modz wrote

ItsSno wrote When you start up your RGH just hit the ejct disc tray button right after pressing the power button and it disables all plugins.

if i do that it gives me 1 RROD light

Hmm make sure everything is plugged in on the back. Is your Dash up to date? It might be just the power cord not plugged in all of the way for the RROD.

no my dash isnt up to date, think that would help? or maybe i should reflash my nand

Update your Dash. and a nand reflash may be needed, but unlikely.

You have to flash the nand when you update anyway. The only way to update the dash on a rgh/jtag is to build a new nand image with xebuild and flash the nand with xell or use simple nand 360 or flash 360

In case you haven't fixed this problem I've had the same problem too. The way that I fixed it was delete dashlaunch and launch.ini off the HDD then boot up the console, if that works you can then reflash the console then put dashlaunch back on or edit the launch.ini manually. Helps?