HawkTheNerd wrote Google might be able to help you update your dashboard

OT: It's as simple to update your dashboard as turning on a option in dashlaunch (updserv to be exact. I think it needs to be latest version of DL too) and open a cmd window, navigate to your xebuild (make sure it's the latest version) folder and type in "xebuild update -f 16537"

Easy as that. It installs avatar updates too.

Chedam wrote (Updated) Dash 16537

What would you need


1 An xbox360 jtagged

2 A computer

3 And a usb flash drive that must "FAT32 formatted"
Quote:
1 : First of all plug usb drive with computer and format as Fat32. then copy "flash 360" folder in root of usb drive (linked below)(download and unrar) now remove it.

Click to View Content

[ Register or Signin to view external links. ]

2 : plug usb drive with xbox360 and turn it on.

3 : launch xexmenu or fsd and go to usb drive and then "flash 360" folder (you just copied to usb drive) and run Flash360.xex file.

4 : You,ll see three options :

Button A : write updflash.bin to nand

Button B : write update areas of rebooters

Button X : backup current nand to file

now becareful press X button from your 360 controller to backup nand and then it will ask for

save entire nand then press A button to continue.

that will save your nand backup named "flashdmp.bin" file in the root of "flash 360" folder.

5 : shutdown your xbox360 console and remove usb drive from xbox360.

6 : plug usb drive to your computer and just copy "flashdmp.bin" file from "flash 360" folder to your pc anywhere you want.

7 : now you have to need your cpu key. its very simple just press eject button on xbox360 console and wait for boot

8 : once cpu key shows up bottom of your screen, please read very carefully and copy it down on a papper and make a .txt (text document)

on your computer and type the cpu key then save it where you want.

9 : now download "xeBuild_GUI_2.091" file (linked below) unrar it and you,ll find "xeBuild_GUI_2.091" folder. ( i have updated and downloaded $SystemUpdate_16537 file in this folder. you dont need to do anything)

Click to View Content

[ Register or Signin to view external links. ]
XeBuild GUI 2.091 : 16537 kernel support added
*********
* 2.091 *
*********
- Updated: Now using xeBuild GUI 1.08
- Updated: Now using Dashlaunch 3.08
- Updated: Now building 2.0.16537.0
- Updated: Now using XeLL-Reloaded v0.993 which supports video on corona!
- Updated: CB identification list has been updated to support all current versions for identification and there was a bugfix with the falcon one (4766 should be 5766)

10 : run "xeBuild GUI 2.0.exe" file from this folder

11 : expand "kernel version" and set 2.0.16537.0. (if this already set 2.0.16537.0 so leave it as it is)

and now click on source file "open" button and open "flashdmp.bin" file you just copied from usb drive to your computer.

12 : now click on "Get cpukey from keys.txt" button and open your saved cpu key.

13 : and click on output path "save" button and named it "updflash" then save it where you want.

14 : then hit "Generate hacked image" button and wait a while then it,ll pop up a message and click on "yes" button.

15 : now copy "updflash.bin"( you have just created and saved in wherever your computer ) to "flash 360" folder in usb drive.

16 : remove usb drive from computer and plug in xbox360. now turn on your xbox360.

17 : launch xexmenu or fsd and go to usb drive and then "flash 360" folder and run Flash360.xex file.

18 : You,ll see these three options again :

Button A : write updflash.bin to nand

Button B : write update areas of rebooters

Button X : backup current nand to file

now press A button from your 360 controller to write updflash.bin. then press A again to "raw flash with keeping current kv/config"

then press A Button then start button to continue.

19 : let it 100% complete then press any button then back buttton after countdown unplug your xbox360 power cable and av cables and any attached hdd for 2 minutes.

20 : after 2 minutes plug back all cables and turn on your xbox360 then configure your new 16537 dash do not connect live just enjoy your new dash.

TheOmgignh2 wrote I think XeX Bunny or XeBrad have great tutorials on this that I myself followed. It doesn't matter what motherboard you have at all falcon, jasper, xenon, corona, they are all the same when it comes to updating dashboards.

TX_F1ERCE_TX wrote

TheOmgignh2 wrote I think XeX Bunny or XeBrad have great tutorials on this that I myself followed. It doesn't matter what motherboard you have at all falcon, jasper, xenon, corona, they are all the same when it comes to updating dashboards.

Yeah but I don't think that the USB option works for him, he will most likely need to open up the console and do all that, unless their is another way I don't know about.

TX_F1ERCE_TX wrote

TheOmgignh2 wrote I think XeX Bunny or XeBrad have great tutorials on this that I myself followed. It doesn't matter what motherboard you have at all falcon, jasper, xenon, corona, they are all the same when it comes to updating dashboards.

Yeah but I don't think that the USB option works for him, he will most likely need to open up the console and do all that, unless their is another way I don't know about.