You are viewing our Forum Archives. To view or take place in current topics click here.
GTA 4 Iso mod not working.
Posted:
GTA 4 Iso mod not working.Posted:
Status: Offline
Joined: Aug 10, 201310Year Member
Posts: 76
Reputation Power: 2
I have no clue why but I tried installing "MAJOR DISTRIBUTION MODLOADER V4" onto a disk everything went perfectly. After that I hotswapped it onto my slim console and it always freezes at 7% and says disc unreadable. I am pretty sure I put all the right files in the right place and what not. Please someone help
Thanks
P.S
The discs are brand new so they are nice and clean no scratches
Thanks
P.S
The discs are brand new so they are nice and clean no scratches
#2. Posted:
Status: Offline
Joined: Aug 29, 201310Year Member
Posts: 33
Reputation Power: 1
Don't take my word, but I think you might have to reboot it.
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: May 01, 201113Year Member
Posts: 168
Reputation Power: 6
Status: Offline
Joined: May 01, 201113Year Member
Posts: 168
Reputation Power: 6
They just dont install if you have a flashed xbox you can still play them.
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Jul 01, 201310Year Member
Posts: 3,957
Reputation Power: 595
Status: Offline
Joined: Jul 01, 201310Year Member
Posts: 3,957
Reputation Power: 595
It means what it says. You probably scratched the disc.
- 0useful
- 0not useful
#5. Posted:
Status: Offline
Joined: May 14, 201311Year Member
Posts: 431
Reputation Power: 15
Status: Offline
Joined: May 14, 201311Year Member
Posts: 431
Reputation Power: 15
what i heard the brand new consoles,you cannot hotswap,it will just get you a error,so dont waste ur time and play legit
- 0useful
- 0not useful
#6. Posted:
Status: Offline
Joined: Nov 18, 201013Year Member
Posts: 4,913
Reputation Power: 3764
What kind of discs are you using?
Cheap media could be the issue, but I doubt it considering GTA 4 is a XGD2 game and XGD2 games are usually ok on cheap media. Verbatim is known to be the most reliable, but I prefer Memorex for other reasons. Make sure the discs are DVD +R DL 8.5GB
Try messing with your settings, also give me the settings that you are currently using for imgburn.
Have you tried re-burning it? It could be many things, but you will have to do a little trial and error until you figure out what the problem is.
It is different for every PC, you will just need to make sure you're doing the mods right and that you have a good iso.
Cheap media could be the issue, but I doubt it considering GTA 4 is a XGD2 game and XGD2 games are usually ok on cheap media. Verbatim is known to be the most reliable, but I prefer Memorex for other reasons. Make sure the discs are DVD +R DL 8.5GB
Try messing with your settings, also give me the settings that you are currently using for imgburn.
Have you tried re-burning it? It could be many things, but you will have to do a little trial and error until you figure out what the problem is.
It is different for every PC, you will just need to make sure you're doing the mods right and that you have a good iso.
- 0useful
- 1not useful
#7. Posted:
Status: Offline
Joined: Jan 12, 201311Year Member
Posts: 1
Reputation Power: 0
As a Selling ISO modder, I believe you may have scratched the disc. But, You may either have a bad ISO download or it was just a bad Rip(Burn).
- 0useful
- 0not useful
#8. Posted:
Status: Offline
Joined: Jun 01, 201211Year Member
Posts: 3,830
Reputation Power: 169
Status: Offline
Joined: Jun 01, 201211Year Member
Posts: 3,830
Reputation Power: 169
You should first ensure you are using a complete healthy burn. Here's how:
- ABGx your disc and check for errors; no errors means it's good.
- Now, open the disc in XBC and extract the default.xex.
- Inject/replace the required files and then re-inject the default.xex.
- Run through ABGx and it will say it's a bad rip (normal).
- Once it's been done, open up IMGburn and put your layer break code to 1913760 and burn at 2.4x. Also make sure you clear your system cache before attempting to install.
Need anymore help, please message me. A
- ABGx your disc and check for errors; no errors means it's good.
- Now, open the disc in XBC and extract the default.xex.
- Inject/replace the required files and then re-inject the default.xex.
- Run through ABGx and it will say it's a bad rip (normal).
- Once it's been done, open up IMGburn and put your layer break code to 1913760 and burn at 2.4x. Also make sure you clear your system cache before attempting to install.
Need anymore help, please message me. A
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.