Hey guy's.


Today i just got my xecuter cr3 lite in the post and its my first ever RGH.

I'm on a RGH-able dash, below 14699 and have a Corona motherboard ;).

its not a 4gb motherboard and the nand i think is 16mg (retail).

Ok now on to the problem: I've install my nand-x wires and everything went smooth, extracted the nand and wrote the ecc file. I then soldered all of the RGH points correctly with some ease except for E and F what is disgusting and the copper rounding is lifted. I then soldered to the bottom of the board as it seemed safer and more reliable. Everything looked good and i then went on to the computer again to double check if I wrote the ecc, so i tryed to re-write it. I got errors after errors to find out my soldering was at fault. To then check if i'd fixed it i re-read the nand overwriting the fresh one like an I***T. I thought i backed it up but sadly i didn't. the ecc is still all good and on the xboxs nand however the coolrunner is messed up.

The coolrunner:

The cool runner problem is extremely annoying me. I've activated switches 1 and 5 as required for the corona, as i've read somewhere and bridged point lk3 and left lk4 at i've messed that point up a bit again . The cool-runner never glitches. i've double checked the wiring and it looks all good. the only thing i can think of is if i forgotten to add a setting to the cr3 or its the doggey point at E and F. is here any corona alternat points for E and F? Note the cool runner attempts to glitch (the green light comes on and off every 5 seconds and makes that high pitched sound).

i've been trying for ages now please can someone help.

I'm sorry about pictures its just simply i just can't find my camera at the moment. unless i take a 1mp fuzzy picture from my BlackBerry.

Forgot to mention : i have programmed my CR to the timing file 4_3 i think.

Thanks to everyone who helps me i really do appreciate it in so many ways

THANK YOU.

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]