by flash your jtag do you mean update it?

to make it the legititment jtag...and when ill need to update it

Those tools are only used during the jtagging process(dumping nand , writing hacked nand). Once you do that you simply remove it, becuase its fully Jtagged/RGH after those steps.

i know but is an lpt or nand-x the only way...thanks for the feed back

nick49286 wrote i know but is an lpt or nand-x the only way...thanks for the feed back

only way ...(to preform what?) - let us in on your secret or theories.

A simple explanation will help us help you.

you need the lpt or nand - x to jtag an xbox

okay on all jtag tutorials they say you either need a nand flasher(nand x) or an lpt port connector..one of those to connect to your pc...im am wondering if there was any other way to connect to your pc without via nand-x or doing it the lpt port way...like a and old xbox play and charge wire

nick49286 wrote okay on all jtag tutorials they say you either need a nand flasher(nand x) or an lpt port connector..one of those to connect to your pc...im am wondering if there was any other way to connect to your pc without via nand-x or doing it the lpt port way...like a and old xbox play and charge wire

I get the idea your trying to Jtag Hack a exploitable console? You will need a few things, and yes, NandX(uses a USB to replace the old LPT printer port connect and speeds read times dramatically). LPT will only work if you have a pc with a LPT Port or printer port.

Yes those are the only 2 ways,However you can buy other types of USB nand flashers many are availible. NANDX comes with support being made by Team Xecuter they offer a forum for help try that out.

so a old printer with an lpt port connector..would i solder my wires and resistors to the lpt in the correct spots and that is probably the easiest way