If your dashboard level is too high to allow the normal Jtag hack to be carried out
(dashboard level 2.0.7371) we still may be able to Jtag your console.

This new Hack is called "Reset Glitch Hack" and needs and the installation of a chip.

The Reset Glitch Hack is compatible with most Xbox 360 models and the dashboard version can be any revision.

All models of SLIM Xbox 360 console and Phat HDMI Xbox 360 consoles (Falcon,Zephyr and Jasper)

****** Note ******

Microsoft have released a new revison of the SLim Xbox 360 main board that currently cannot be RGH (Reset Glitch Hacked), you can confirm if your Slim console has the unhackable main board by reading the label at the rear of the console. The unhackable Slim has a 12v 9.6a rating on the rear label.

If this hack is carried out, then the console CANNOT be used on the LIVE service

Slim Xbox 360 Console with Reset Glitch Installed




Phat ( Original ) Xbox 360 HDMI Console with Reset Glitch Installed


Phat Xbox 360 BB Jasper 512mb HDMI Console with Reset Glitch Installed

The big block Jasper 256 / 512mb consoles can be difficult to glitch using the Reset Glitch hack, the below video was a console that was sent to ourselves after a customer had sent this console to another company for the Reset Glitch Hack to be installed. The console was returned to them as unglitchable.

How ever we not only managed to successfully install the Reset Glitch Hack into the console, but managed to get it to boot in under four seconds !!!!

Each console is different, but we always ensure every console leaving our premises, glitches as quickly as possible.





**** Note ***

Non HDMI Xbox 360 consoles (Xenon main boards) are not Reset Glitch Hackable.

___________________________________________________________________________________

How this hack works

To explain it (very) simply, we install a chip inside the console thats sends pulses to the processor in order to distabilize the console and allow you to boot unassigned code.

(this can take from 3 seconds - 3 minutes)

Once the hack is activated it allows you to boot unassigned code like Xell or boot another dashboard like FreeStyle Dash or Xexmenu, you can even boot into the latest Freeboot 14719 dashboard.

This also allows you to connect any size external hard disk and play ISO's directly from a harddisk.



Other Benefits of carrying out this modification

1. Run Homebrew

2. Run Linux (Xell)

3. Run Emulators

3. Run XBReebooter dashboards - Custom Dashboards + Xell (Linux Bootable)

4. Run XEX Menu - load your games onto your harddisk and play them without having a
disk in the DVD drive

5. Connect any size Harddisk, how about a 2TB drive to copy your games to?


Step By Step Guide:

This guide is for customers who did not bring a hard drive when doing RGH/JTAG, can follow the
following steps and install freestyle easily themselves using following instructions.

Download the needed tools below, and save to your PC.

IMGBurn (Free tool to burn ISO files to CDs/DVDs etc):

[ Register or Signin to view external links. ]

FREESTYLE DASHBOARD:


[ Register or Signin to view external links. ]

Dash Launch Installer:

[ Register or Signin to view external links. ]

USB LAUNCH.INI:

[ Register or Signin to view external links. ]

XEXMenu CD Version (Basic starting tool to install stuff):

[ Register or Signin to view external links. ]

FAT32 Formatter Tool (format tool for hard drives):

[ Register or Signin to view external links. ]

Xbox Image Browser (ISO extraction tool, to extract XBOX 360 ISOs):

[ Register or Signin to view external links. ]


STEP 1) Setting up external hard drive

Connect the hard drive to your PC
Use FAT32 Formatter tool to format the drive to FAT32 file system
FAT32Formatter might require Windows XP Compatibility on Windows 7
Extract freestyle.rar to external hard drive
Copy launch.ini to external hard drive
Extract dash_launch_v2.25.zip to external hard drive
Make a folder called Games on your hard drive.
CHECK: Hard drive should have 4 items now:
Freestyle folder, dash launch folder, Games folder and launch.ini file


STEP 2) Using XEXMenu to Install Dash Launch

Burn XEXMenu ISO to a blank CD/DVD using IMGBurn program
Put the disc in the XBOX 360 and start it
XEXMenu will load up
Press left shoulder button twice to access file manager
Connect your external USB and wait for it to show up in XEXMenu
Go to dashlaunch folder, and then into Installer folder.
Start the default.xex file and install dash launch using onscreen instructions
If it asks to update launch.ini, press B to skip.
Dash launch is now installed.
Start the Xbox 360 console, and freestyle dashboard should load automatically.

STEP 3) Adding games to your harddisk using Xbox Image Browser

To extract the contents of the .ISO, we will use Xbox Image Browser

Run Xbox Image Browser.exe and select File-->Open Image File

[ Register or Signin to view external links. ]

Select your XBOX 360 .ISO file. For this tutorial, we will use Madden NFL 2010

[ Register or Signin to view external links. ]

Right Click on the name of the .ISO and select extract

[ Register or Signin to view external links. ]

Create a new folder to place the extracted files in and click OK

STEP 4) Adding games path to freestyle dashboard

Start Freestyle Dash
Then Go To " Utilities ", And the " Settings Tab "
Then Go To " Console Settings "
Then " Manage Game Paths "
Then Press "Y" to Add a Folder Path
Click On " Change Path " Then Locate where your Games are Saved
You would choose USB:/Games in this step.
Press "Y" When you are INSIDE the Folder where the games are saved
Press X" to SAVE the Path you have now added.
Restart freestyle, go to XBOX360 Games in freestyle dashboard and check

FINISHED!!!!

Other Important info:

* If console is using RGH, it can take anywhere 6 to 30 seconds for the console to start if you
have a FAT XBOX 360; Slim consoles can take 10 to 60 seconds to start. If console does not start within this time simply turn off and retry after 15 seconds so that it is discharged.