You are viewing our Forum Archives. To view or take place in current topics click here.
FALCON JTAG BLACK SCREEN PLEASE HELP!
Posted:
FALCON JTAG BLACK SCREEN PLEASE HELP!Posted:
Status: Offline
Joined: May 23, 201212Year Member
Posts: 77
Reputation Power: 3
Status: Offline
Joined: May 23, 201212Year Member
Posts: 77
Reputation Power: 3
so i just got my falcon jtag and when trying to turn it on it runs and starts up but when i go to my tv its just all black. im fairly good at soldering so any of those fixing methods i should be capable of doing. also there are no wires coming out for me to plug into my computer so im pretty much stuck with a black screen, not even knowing the error code. if anyone can help id gladly be happy to pay $$$$$ over paypal or MS Points or anything. i just want my jtag working
thanks
thanks
#2. Posted:
Status: Offline
Joined: Aug 11, 201211Year Member
Posts: 16
Reputation Power: 0
The specific type of hardware failure can be determined by a \"hidden\" error code
* Turn the xbox 360 on, and wait till the 3 red lights are flashing.
* Press and hold the sync up button (the small white one), while holding that button press the eject button.
* The LEDs will now blink the first number in the code (as described below).
* Release the eject button and press it again.
* The LEDs will now blink the second number of the code.
* Release the eject button and press it again.
* The LEDs will now blink the third number of the code.
* Release the eject button and press it again.
* The LEDs will now blink the forth number of the code.
* Release the eject button and press it again.
* The LEDs will go back to the 3 red flashing lights.
You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.
Here is how you interpret the LEDs to get the code number:
* All four lights flashing - 0
* One light flashing - 1
* Two Lights flashing - 2
* Three lights flashing - 3
You will for example get an error code like 0102 if you get 4 lights after the first click, 1 after the second, 4 after the third and 2 after the fourth click of the eject button...
* Turn the xbox 360 on, and wait till the 3 red lights are flashing.
* Press and hold the sync up button (the small white one), while holding that button press the eject button.
* The LEDs will now blink the first number in the code (as described below).
* Release the eject button and press it again.
* The LEDs will now blink the second number of the code.
* Release the eject button and press it again.
* The LEDs will now blink the third number of the code.
* Release the eject button and press it again.
* The LEDs will now blink the forth number of the code.
* Release the eject button and press it again.
* The LEDs will go back to the 3 red flashing lights.
You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.
Here is how you interpret the LEDs to get the code number:
* All four lights flashing - 0
* One light flashing - 1
* Two Lights flashing - 2
* Three lights flashing - 3
You will for example get an error code like 0102 if you get 4 lights after the first click, 1 after the second, 4 after the third and 2 after the fourth click of the eject button...
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.