#11. Posted:
Status: Offline
Joined: Apr 28, 20212Year Member
Posts: 12
Reputation Power: 0
Status: Offline
Joined: Apr 28, 20212Year Member
Posts: 12
Reputation Power: 0
Hentch wrote Take flashdmp.bin, load it into Jrunner, enter your cpukey and glitch type and create the xebuild image. Then you need to write the xebuild image (updflash) to your xbox. Do this with a JR Programmer / Nand X or the USB method by placing updflash on a usb drive, boot into xell and it should detect updflash and write it automatically. When finished you will see "image written, shut down now!" Shut down, replug the power cable and reboot the xbox. Done! I don't have the JR Programmer / Nand X tools But I bought the Matrix NAND Programmer (MTX SPI Flasher) from Ali Express and soon it should arrive to me, and I don't know if this tool is suitable for my problem As for what you said about making the nand file, I did exactly as what you said, but the problem that the device does not read the bin files and I do not know the reason I have another question ? In my device there is the tool CoolRunner, Is the Matrix SBI Flasher suitable for this tool because I saw 2 picture on the Internet of these two tools connected to each other and I don't know if they are for solving NAND flashing problems thanks https://www10.0zz0.com/2021/05/30/02/825042998.png https://www13.0zz0.com/2021/05/30/02/484462923.jpg |
- 0useful
- 0not useful
#12. Posted:
Status: Offline
Joined: Jul 25, 201112Year Member
Posts: 571
Reputation Power: 51
Status: Offline
Joined: Jul 25, 201112Year Member
Posts: 571
Reputation Power: 51
|
Matrix programmer should work but I have never used it.
"the device does not read the bin files" You lost me here. Explain more? Those images you posted are for XSVF glitch chip programming. You don't need that. You need to write freeboot to your xbox using the instructions above. |
- 0useful
- 0not useful
Users browsing this topic: None