ModdingFresh RGH Install - and it appears brickedPosted:

Status: Offline
Joined: Nov 19, 20181 Year Member
Posts: 40
Reputation Power: 1
https://weekendmodder.com/store/image/catalog/item%20pics/PLL%20and%20RST.png
The only thing i can think that has been strange is on my console the RST point did not come pre tinned




so i just installed matrix glitch chip
everytime i write ECC file. it bricks itself (Getting the green dot and nothing boots not even into xell)

When i write original updflash it boots as normal

i have re checked my wiring and cannot see anything un ordinary

If there was problems with the wiring wouldn't i get errors anyway.

appears like the console doe not want to be rghed at this point, just looking for some pointers

could it be the timing file? i know this glitch chip im using allready had a timing file [DETECTED]

should i have just used the original timing file.

the glitch chip blue light comes on then blinks twice and repeats but only when i switch the console on

its a PHAT Falcon using matrix glitch chip v1
#2. Posted:
Rodent_Modz
  • TTG Warrior
Status: Offline
Joined: Jan 21, 20128 Year Member
Posts: 9,100
Reputation Power: 3722
if it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?
#3. Posted:
Status: Offline
Joined: Nov 19, 20181 Year Member
Posts: 40
Reputation Power: 1
Rodent_Modz wroteif it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.
#4. Posted:
Rodent_Modz
  • Christmas!
Status: Offline
Joined: Jan 21, 20128 Year Member
Posts: 9,100
Reputation Power: 3722
Bowd wrote
Rodent_Modz wroteif it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.


use timing file 1.2_19
#5. Posted:
Status: Offline
Joined: Nov 19, 20181 Year Member
Posts: 40
Reputation Power: 1
Rodent_Modz wrote
Bowd wrote
Rodent_Modz wroteif it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.


use timing file 1.2_19


still no luck just tried that timing and it still does not want to boot , i just get a blinking green dot
#6. Posted:
Rodent_Modz
  • Winter 2018
Status: Offline
Joined: Jan 21, 20128 Year Member
Posts: 9,100
Reputation Power: 3722
Bowd wrote
Rodent_Modz wrote
Bowd wrote
Rodent_Modz wroteif it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.


use timing file 1.2_19


still no luck just tried that timing and it still does not want to boot , i just get a blinking green dot


show me a pic of your chip and full install on board i think i know what the problem is just need to see for myself
#7. Posted:
Status: Offline
Joined: Nov 19, 20181 Year Member
Posts: 40
Reputation Power: 1
#8. Posted:
Status: Offline
Joined: Nov 19, 20181 Year Member
Posts: 40
Reputation Power: 1
[quote="Rodent_Modz"][quote="Bowd"]
Rodent_Modz wrote
Bowd wrote
Rodent_Modz wroteif it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.


use timing file 1.2_19


still no luck just tried that timing and it still does not want to boot , i just get a blinking green dot[/quote

imgur.com/a/PbNw1bg
#9. Posted:
Rodent_Modz
  • V5 Launch
Status: Offline
Joined: Jan 21, 20128 Year Member
Posts: 9,100
Reputation Power: 3722
Bowd wrotehttps://imgur.com/lWhSsej

imgur.com/a/PbNw1bg


i would route the wires differently and i would fix the FT28 point


Last edited by Rodent_Modz ; edited 1 time in total
#10. Posted:
Status: Offline
Joined: Nov 19, 20181 Year Member
Posts: 40
Reputation Power: 1
Rodent_Modz wrote
Bowd wrotehttps://imgur.com/lWhSsej

imgur.com/a/PbNw1bg


i will take a look and message you on ttg messanger


ok thanks
Users browsing this topic: None
Jump to:


RECENT POSTS

HOT TOPICS