Xbox 360Open Tray ErrorPosted:
Welp, I know this isn't new to a lot of you but, I bought a few console's recently and 2 of which have the open tray error.
I did a basic check on both console's such as cleaning dust, cleaning the laser, following youtube vids, although I still can't figure out why it's still giving me this issue. Any help or advice is greatly appreciated. Thanks! |
#2. Posted:
Status: Offline
Joined: Jan 21, 20127 Year Member
Posts: 8,934
Reputation Power: 3489
Motto: #1 Trusted Seller. Jtags/ RGHS/PS3/Etc.
Laser needs to be replaced. It's completely isn't strong enough to read the disk |

- 0useful
- 0not useful
#3. Posted:
Rodent_Modz wroteLaser needs to be replaced. It's completely isn't strong enough to read the disk Yeah that's what I started to think after doing a bit more research, Thanks Rodent!! |
- 1useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Jan 21, 20127 Year Member
Posts: 8,934
Reputation Power: 3489
Motto: #1 Trusted Seller. Jtags/ RGHS/PS3/Etc.
Hentch wroteRodent_Modz wroteLaser needs to be replaced. It's completely isn't strong enough to read the disk Which drives are they I may have lasers for them in stock |

- 0useful
- 0not useful
#5. Posted:
Rodent_Modz wroteHentch wroteRodent_Modz wroteLaser needs to be replaced. It's completely isn't strong enough to read the disk Phillips & Lite-On DG-16D2S is one, I haven't taken the other console apart yet but I can get back to you on that. |
- 0useful
- 0not useful
#6. Posted:
@Rodent_Modz - Both drives are the same. |
- 0useful
- 0not useful
#7. Posted:
Status: Offline
Joined: Jan 21, 20127 Year Member
Posts: 8,934
Reputation Power: 3489
Motto: #1 Trusted Seller. Jtags/ RGHS/PS3/Etc.
Hentch wroteRodent_Modz wroteHentch wroteRodent_Modz wroteLaser needs to be replaced. It's completely isn't strong enough to read the disk I should have these lasers in stock. Most common in jasper consoles if I do not have them I will send you my supplier who I purchase them from |

- 0useful
- 0not useful
#8. Posted:
Rodent_Modz wroteHentch wroteRodent_Modz wroteHentch wroteRodent_Modz wroteLaser needs to be replaced. It's completely isn't strong enough to read the disk Thanks! Both of these console's are actually falcons. |
- 0useful
- 0not useful
#9. Posted:
try turning the screws on the laser little at a time and try to see if that works if not your going to have to replace the laser. |
- 0useful
- 0not useful
Users browsing this topic: None