Xbox 360Xell Reloaded RGH2.0 Trinity
Posted:

Xbox 360Xell Reloaded RGH2.0 TrinityPosted:

PAWGslutlover13
  • New Member
Status: Offline
Joined: Mar 20, 20213Year Member
Posts: 1
Reputation Power: 0
Status: Offline
Joined: Mar 20, 20213Year Member
Posts: 1
Reputation Power: 0
I feel like a **** retard for doing this, but I accidentally overwrote (which also deleted ALL BUT TWO of the flash files I need) the flash/system folder and now I can't get to the dashboard and it doesn't even boot to the logo. I tried flashing with Xell Reloaded and it's stuck on the "Trying dvd0:/kboot.conf" message and it won't go any further. I've tried using the USB I formatted to FAT32, but it's not registering that I have the updflash.bin file on the USB pen when I try to flash it. What do I do? I've even used the XeBuild 1.21 program and rewrote the updflash.bin file, but still nothing. Any ideas?
#2. Posted:
Rodent
  • Christmas!
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 9,946
Reputation Power: 11562
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 9,946
Reputation Power: 11562
Send me the console and the updflash.bin when the console was working. I will repair it
#3. Posted:
Hentch
  • Summer 2021
Status: Offline
Joined: Jul 25, 201112Year Member
Posts: 571
Reputation Power: 51
Status: Offline
Joined: Jul 25, 201112Year Member
Posts: 571
Reputation Power: 51
Trinity motherboard? Try another USB drive formatted with an xbox 360 and make sure updflash is on the root (USB:\updflash)
#4. Posted:
Rodent
  • E3 2017
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 9,946
Reputation Power: 11562
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 9,946
Reputation Power: 11562
Hentch wrote Trinity motherboard? Try another USB drive formatted with an xbox 360 and make sure updflash is on the root (USB:\updflash)


It will not reflash due to he has reflashed it with RGLoader has to be manually flashed with nand x or jr programmer
#5. Posted:
Hentch
  • Winter 2022
Status: Offline
Joined: Jul 25, 201112Year Member
Posts: 571
Reputation Power: 51
Status: Offline
Joined: Jul 25, 201112Year Member
Posts: 571
Reputation Power: 51
Rodent_Modz wrote
Hentch wrote Trinity motherboard? Try another USB drive formatted with an xbox 360 and make sure updflash is on the root (USB:\updflash)


It will not reflash due to he has reflashed it with RGLoader has to be manually flashed with nand x or jr programmer


If his console still boots xell and is not a 4gb corona he can simply reflash using a USB drive and his updflash without soldering anything.
#6. Posted:
Rodent
  • E3 2017
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 9,946
Reputation Power: 11562
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 9,946
Reputation Power: 11562
Hentch wrote
Rodent_Modz wrote
Hentch wrote Trinity motherboard? Try another USB drive formatted with an xbox 360 and make sure updflash is on the root (USB:\updflash)


It will not reflash due to he has reflashed it with RGLoader has to be manually flashed with nand x or jr programmer


If his console still boots xell and is not a 4gb corona he can simply reflash using a USB drive and his updflash without soldering anything.


He flashed the console with RGLoader now Xell will not boot properly so it has to be reflashed manually. If you read what he says. Xell doesn't fully load
#7. Posted:
Hentch
  • Winter 2022
Status: Offline
Joined: Jul 25, 201112Year Member
Posts: 571
Reputation Power: 51
Status: Offline
Joined: Jul 25, 201112Year Member
Posts: 571
Reputation Power: 51
I did read everything, he can still reflash without soldering. The ""Trying dvd0:/kboot.conf" shows up only when xell fully loads so obviously updflash isn't being detected.

Again, he just needs a USB formatted with an xbox 360, updflash on the root of that USB and I guarantee xell will detect and reflash it. No soldering needed
#8. Posted:
Rodent
  • Winter 2016
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 9,946
Reputation Power: 11562
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 9,946
Reputation Power: 11562
Hentch wrote I did read everything, he can still reflash without soldering. The ""Trying dvd0:/kboot.conf" shows up only when xell fully loads so obviously updflash isn't being detected.

Again, he just needs a USB formatted with an xbox 360, updflash on the root of that USB and I guarantee xell will detect and reflash it. No soldering needed


Will not work due to he flashed it with RGLoader thru usb which never which never works
#9. Posted:
Eli
  • Winter 2021
Status: Offline
Joined: Jun 12, 201310Year Member
Posts: 1,186
Reputation Power: 204
Status: Offline
Joined: Jun 12, 201310Year Member
Posts: 1,186
Reputation Power: 204
Absolute shit post coming in but OP's name cracked me up.
Users browsing this topic: None
Jump to:


RECENT POSTS

HOT TOPICS