RequestRGB Fans, SMPS, Hub assembly problem
Posted:

RequestRGB Fans, SMPS, Hub assembly problemPosted:

mofhasa
  • New Member
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
Hi everyone!

This is my first time building and I am a complete beginner. Please kindly excuse any dumb questions that might come your way.

I connected the radiator and system fan to the motherboard (both LED and power)

Apart from that I have two RGB fans:
1. 2x Apevia RGB fans

These are the parts that I need to make sure are connected right:

[Minimum post requirement for links]

Closer look into the hub:

[Minimum post requirement for links]

Closer look into the connectors/adapters and fan cables:

Cables for each fan:
[Minimum post requirement for links]

Molex to 4 pin:
[Minimum post requirement for links]

LED pin to 3 pin:
[Minimum post requirement for links]

I don't know if I am missing something or just can't figure out how to assemble. The size of the three pin connector on each fan don't match the three pin connection on the hub. Please provide some guidance. Thanks!

MOBO: GIGABYTE B450M DS3H WIFI


Last edited by mofhasa ; edited 4 times in total
#2. Posted:
Chris
  • Retired Staff
Status: Offline
Joined: Nov 27, 201013Year Member
Posts: 1,469
Reputation Power: 19356
Motto: Only you can judge your life. You have to live up to your own expectations.
Motto: Only you can judge your life. You have to live up to your own expectations.
Status: Offline
Joined: Nov 27, 201013Year Member
Posts: 1,469
Reputation Power: 19356
Motto: Only you can judge your life. You have to live up to your own expectations.
I'll try to see if I can get your links fixed. It's being met by a filter; I would recommend Imgur
#3. Posted:
mofhasa
  • New Member
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
Chris wrote I'll try to see if I can get your links fixed. It's being met by a filter; I would recommend Imgur


Done! Thank you.
#4. Posted:
mofhasa
  • New Member
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
Hi all,

I figured out how to insert the images inline. I know it was tedious to go to each link.

Hopefully it's convenient now. Please help lol
#5. Posted:
21
  • Rated Awesome
Status: Offline
Joined: Oct 05, 201310Year Member
Posts: 16,201
Reputation Power: 3084
Motto: Me big smarts. Brainy boy do learns much
Motto: Me big smarts. Brainy boy do learns much
Status: Offline
Joined: Oct 05, 201310Year Member
Posts: 16,201
Reputation Power: 3084
Motto: Me big smarts. Brainy boy do learns much
Is that the Apevia controller you have for the fans? Or is it a generic fan/RGB splitter?
#6. Posted:
mofhasa
  • New Member
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
21 wrote Is that the Apevia controller you have for the fans? Or is it a generic fan/RGB splitter?


I bought these parts from Cyberpower PC. I have emailed them this issue as well. I dont think its from Apevia.
#7. Posted:
mofhasa
  • New Member
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
Status: Offline
Joined: Nov 10, 20203Year Member
Posts: 5
Reputation Power: 0
Thanks but no thanks -_-

[Minimum post requirement for links]
Users browsing this topic: None
Jump to:


RECENT POSTS

HOT TOPICS