AdvicePc won't turn on after build....
Posted:
AdvicePc won't turn on after build....Posted:
Status: Offline
Joined: Nov 05, 20185Year Member
Posts: 10
Reputation Power: 0
| Put everything together, motherboard lights up, PSU connected, nothing turns on when I press the power button. |
#2. Posted:
Status: Offline
Joined: Apr 09, 201212Year Member
Posts: 1,160
Reputation Power: 78
KboxTV wrote Put everything together, motherboard lights up, PSU connected, nothing turns on when I press the power button. Retrace your steps you taken, look at all the wiring inside the pc and outside. Make sure all the components are in the correct place, including RAM in correct slots. |
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Jun 12, 201310Year Member
Posts: 1,186
Reputation Power: 204
Status: Offline
Joined: Jun 12, 201310Year Member
Posts: 1,186
Reputation Power: 204
| Check the positive negative cables ( I believe that's what their called) But on my motherboard mine were not plugged into the correct order. Look at your motherboard booklet that it came with and it will show you where exactly to put them. Also be sure your main cable from your power supply to your motherboard is fully plugged in and that your PSU cable is aswell fully plugged into your PSU itself. |
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Nov 05, 20185Year Member
Posts: 10
Reputation Power: 0
| So figured out my power supply wouldn't power my motherboard because it proprietary, so had to buy a new motherboard and processor |
- 0useful
- 0not useful
Users browsing this topic: None