You are viewing our Forum Archives. To view or take place in current topics click here.
JR programmer stuck in bootloader
Posted:

JR programmer stuck in bootloaderPosted:

Jwittke67
  • New Member
Status: Offline
Joined: Sep 03, 20185Year Member
Posts: 32
Reputation Power: 1
Status: Offline
Joined: Sep 03, 20185Year Member
Posts: 32
Reputation Power: 1
hello everyone on ttg

i have a jr programmer v2 i want to use it to rgh 1.2 a jasper motherboard.
although, when i plug it into my computer all i get is a solid red light..
when i open j runner i get this....

Checking files..
Unable to check files.

when i go to write the firmware i get this text log..

===================================================
Wednesday, October 10, 2018 8:50:20 PM

J-Runner v0.3 Beta (7) Started


Checking Files
Unable to check files
Device Not Found


who can help me get this jr programmer out of bootloader?? ive reached out to jus about everyone that i could think of that could spread some light on this jasper motherboard "project"
and no luck.
uhmm for the wire that connects the jr programmer to the computer i have used a regular micro usb with a attatchment on the end that makes it fit into the jr programmer. would this be my issue or something far more severe??
Please help
P.s. please dont just link me to a youtube video because ive watched just about everyone of them regarding this issue, tried it all.
#2. Posted:
XeCrippy
  • Winter 2018
Status: Offline
Joined: May 12, 20167Year Member
Posts: 1,889
Reputation Power: 1259
Status: Offline
Joined: May 12, 20167Year Member
Posts: 1,889
Reputation Power: 1259
If you have a different usb cable I'd give a try just in case. Also disable any anti virus programs you have because I ran into a similar issue just recently even though I use it often with the same av protection.

Have you ever used this Jr programmer before with your current pc?
#3. Posted:
Jwittke67
  • New Member
Status: Offline
Joined: Sep 03, 20185Year Member
Posts: 32
Reputation Power: 1
Status: Offline
Joined: Sep 03, 20185Year Member
Posts: 32
Reputation Power: 1
yes ive used this jr programmer with this pc before.
#4. Posted:
XeCrippy
  • Winter 2018
Status: Offline
Joined: May 12, 20167Year Member
Posts: 1,889
Reputation Power: 1259
Status: Offline
Joined: May 12, 20167Year Member
Posts: 1,889
Reputation Power: 1259
You should be able to reflash the jrp firmware as long as the switch is in the right position. Make sure both switches are away from the usb port, disconnect it from your console and plug it into your PC by itself and try reflashing it. You won't be able to do anything until you get it out of BL.
#5. Posted:
Jwittke67
  • New Member
Status: Offline
Joined: Sep 03, 20185Year Member
Posts: 32
Reputation Power: 1
Status: Offline
Joined: Sep 03, 20185Year Member
Posts: 32
Reputation Power: 1
Yeah ikno. That's the problem im having, see the post above and read the log I put in.
When I connext my jr programmer alone with nothing attached I get a solid red light. When I go into j runner and try to re flash the firmware it doesnt acknowledge it being there... Therefore the text log in j runner says device not found as stated above !
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.