You are viewing our Forum Archives. To view or take place in current topics click here.
Booting Xell Reloaded [RGH'd Falcon]
Posted:
Booting Xell Reloaded [RGH'd Falcon]Posted:
Status: Offline
Joined: Jun 26, 201013Year Member
Posts: 6,132
Reputation Power: 1391
Status: Offline
Joined: Jun 26, 201013Year Member
Posts: 6,132
Reputation Power: 1391
Okay, So I just got done finishing soldering all the wires ect I dumped my nand compared them matched up fine.
So then I created the ECC then I selected write and then I went to boot xell to retrieve my cpu key and it isn't booting XR I am not sure why maybe I did something wrong?
Any tips/suggestions will be much appreciated thank you.
So then I created the ECC then I selected write and then I went to boot xell to retrieve my cpu key and it isn't booting XR I am not sure why maybe I did something wrong?
Any tips/suggestions will be much appreciated thank you.
#2. Posted:
Status: Offline
Joined: Jun 19, 201013Year Member
Posts: 5,070
Reputation Power: 216
Status: Offline
Joined: Jun 19, 201013Year Member
Posts: 5,070
Reputation Power: 216
rgh1 or 2?
pics of soldering... is a must, and have a little more details aswell.
removed and bridged correct resistors on rev c Coolrunner? flashed correct XSVF to Coolrunner... wire placement ect.. all plays a part in teh hack so post pics and go from there.
pics of soldering... is a must, and have a little more details aswell.
removed and bridged correct resistors on rev c Coolrunner? flashed correct XSVF to Coolrunner... wire placement ect.. all plays a part in teh hack so post pics and go from there.
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Jan 27, 201212Year Member
Posts: 1,912
Reputation Power: 81
Status: Offline
Joined: Jan 27, 201212Year Member
Posts: 1,912
Reputation Power: 81
Um need to know RGH1 Or 2
- 0useful
- 1not useful
#4. Posted:
Status: Offline
Joined: Jun 26, 201013Year Member
Posts: 6,132
Reputation Power: 1391
Status: Offline
Joined: Jun 26, 201013Year Member
Posts: 6,132
Reputation Power: 1391
-Mafia5K- wrote rgh1 or 2?
pics of soldering... is a must, and have a little more details aswell.
removed and bridged correct resistors on rev c Coolrunner? flashed correct XSVF to Coolrunner... wire placement ect.. all plays a part in teh hack so post pics and go from there.
RGH 2.0, CoolRunner Rev B.
The soldering is perfect everything has been triple checked ect.
But I believe I forgot to solder the resistors.
- 0useful
- 0not useful
#5. Posted:
Status: Offline
Joined: Jun 19, 201013Year Member
Posts: 5,070
Reputation Power: 216
Status: Offline
Joined: Jun 19, 201013Year Member
Posts: 5,070
Reputation Power: 216
rev b need to add a 10ohm reistor and removal of c15 cap.. in series to CPU_RST.
you can also try running 50ohm Low loss cable or try a 470pF or 680pF cap & 3.3k resistor in parallel to CPU_rST, i myself had good luck by etending CPu rst with kynar wire and making to 2 inch dia. loops right near cpurst on top of board.
Last edited by 5KMods ; edited 1 time in total
you can also try running 50ohm Low loss cable or try a 470pF or 680pF cap & 3.3k resistor in parallel to CPU_rST, i myself had good luck by etending CPu rst with kynar wire and making to 2 inch dia. loops right near cpurst on top of board.
Last edited by 5KMods ; edited 1 time in total
- 0useful
- 0not useful
#6. Posted:
Status: Offline
Joined: Jun 26, 201013Year Member
Posts: 6,132
Reputation Power: 1391
Status: Offline
Joined: Jun 26, 201013Year Member
Posts: 6,132
Reputation Power: 1391
-Mafia5K- wrote rev b need to add a 10ohm reistor in series to CPU_RST.
you can also try running 50ohm Low loss cable or try a 470pF or 680pF cap & 3.3k resistor in parallel to CPU_rST, i myself had good luck by etending CPu rst with kynar wire and making to 2 inch dia. loops right near cpurst on top of board.
I happen to have 2 50ohm Low loss cables I mite give that a try in a bit.
- 0useful
- 0not useful
#7. Posted:
Status: Offline
Joined: Aug 30, 201013Year Member
Posts: 1,669
Reputation Power: 73
Status: Offline
Joined: Aug 30, 201013Year Member
Posts: 1,669
Reputation Power: 73
Having the same problem. Mine is a RGH 1 and is also a falcon. I have already checked the solder points and the coolrunner also doesn't flash green when I try to boot into xell(Doesn't boot into xell).
Any suggestions on what I may have done wrong?
Any suggestions on what I may have done wrong?
- 0useful
- 0not useful
#8. Posted:
Status: Offline
Joined: Jun 19, 201013Year Member
Posts: 5,070
Reputation Power: 216
Status: Offline
Joined: Jun 19, 201013Year Member
Posts: 5,070
Reputation Power: 216
-Kenwire- wrote Having the same problem. Mine is a RGH 1 and is also a falcon. I have already checked the solder points and the coolrunner also doesn't flash green when I try to boot into xell(Doesn't boot into xell).
Any suggestions on what I may have done wrong?
make your own thread rather then hyjacking his...
normally cpu_pll_ bypass is the cause it controls controls signal.
- 1useful
- 0not useful
#9. Posted:
Status: Offline
Joined: Aug 30, 201013Year Member
Posts: 1,669
Reputation Power: 73
Status: Offline
Joined: Aug 30, 201013Year Member
Posts: 1,669
Reputation Power: 73
-Mafia5K- wrote-Kenwire- wrote Having the same problem. Mine is a RGH 1 and is also a falcon. I have already checked the solder points and the coolrunner also doesn't flash green when I try to boot into xell(Doesn't boot into xell).
Any suggestions on what I may have done wrong?
make your own thread rather then hyjacking his...
normally cpu_pll_ bypass is the cause it controls controls signal.
Ok ill make my own thread.
- 0useful
- 0not useful
#10. Posted:
Status: Offline
Joined: May 03, 201112Year Member
Posts: 3,845
Reputation Power: 251
Status: Offline
Joined: May 03, 201112Year Member
Posts: 3,845
Reputation Power: 251
If it is RGH 2.0 and you are not using a rev c coolrunner you have to add/ change some things on the coolrunner. Go to team xecuter for a more detailed explanation.
- 1useful
- 1not useful
You are viewing our Forum Archives. To view or take place in current topics click here.