You are viewing our Forum Archives. To view or take place in current topics click here.
Getting high idle temps on i7 4790k
Posted:

Getting high idle temps on i7 4790kPosted:

ProJimmyRustler
  • TTG Senior
Status: Offline
Joined: Jul 14, 20149Year Member
Posts: 1,720
Reputation Power: 71
Status: Offline
Joined: Jul 14, 20149Year Member
Posts: 1,720
Reputation Power: 71
Hey guys,

I recently noticed that I was getting a really High idle temps on my 4790k.
At idle it shows to be at 60c and after a few mins of gaming it goes up to 80c.

I'm using the stock cooler and as far as I know, the CPU is not being over clocked.

What could be causing these idle temps? Is it the cooler?
If so, please suggest a cooler that I should use. I have a small case, so keep that in mind on suggestions. (Corsair Carbide Series Air 240 High Airflow MicroATX)
#2. Posted:
Kaneki
  • 2 Million
Status: Offline
Joined: Dec 12, 201013Year Member
Posts: 4,019
Reputation Power: 173
Status: Offline
Joined: Dec 12, 201013Year Member
Posts: 4,019
Reputation Power: 173
The stock cooler should be completely fine if your not overclocking, but when was the last time you replaced your thermal paste? Also does your case have a good airflow?
#3. Posted:
ATLatimer
  • TTG Addict
Status: Offline
Joined: Oct 11, 201310Year Member
Posts: 2,465
Reputation Power: 151
Status: Offline
Joined: Oct 11, 201310Year Member
Posts: 2,465
Reputation Power: 151
I had the same problem had temps up to 100C and bought a hyper 12 evo and it went to around 50C
#4. Posted:
ProJimmyRustler
  • Summer 2018
Status: Offline
Joined: Jul 14, 20149Year Member
Posts: 1,720
Reputation Power: 71
Status: Offline
Joined: Jul 14, 20149Year Member
Posts: 1,720
Reputation Power: 71
Kaneki wrote The stock cooler should be completely fine if your not overclocking, but when was the last time you replaced your thermal paste? Also does your case have a good airflow?

The air flow is good. Also, I wasn't aware that you had to regularly thermal paste? I'm still new to PCs.

Vladimer wrote I had the same problem had temps up to 100C and bought a hyper 12 evo and it went to around 50C

I figured out the issue. My PC's power settings were on high performance. This was causing my CPU to clock higher than usual. I turned that off and the temps went down to 40-45C.

I went ahead and bought a new cooler though. Noctua Dual Tower CPU Cooler NH-D9L
#5. Posted:
ProLiquidHD
  • Junior Member
Status: Offline
Joined: Aug 08, 201310Year Member
Posts: 67
Reputation Power: 2
Status: Offline
Joined: Aug 08, 201310Year Member
Posts: 67
Reputation Power: 2
80'c is very normal with the stock cooler, That's nothing to worry about many CPU's maximum TDP is rated lower on the package/website as a fail safe. If you do feel that the temps are getting to highyou can always invest a decent cooler such as a hyper 212 evo they are very cheap but very effective it has the best bang for your buck in the cooler category in my opinion.
#6. Posted:
Kaneki
  • 2 Million
Status: Offline
Joined: Dec 12, 201013Year Member
Posts: 4,019
Reputation Power: 173
Status: Offline
Joined: Dec 12, 201013Year Member
Posts: 4,019
Reputation Power: 173
There is not definite span of time when you should change your thermal paste. I usually do it when I notice my cpu temp rising on idle. There are many guide/videos on the internet if you need help with that in the future.
#7. Posted:
Gospel
  • Resident Elite
Status: Offline
Joined: Aug 28, 201211Year Member
Posts: 284
Reputation Power: 12
Status: Offline
Joined: Aug 28, 201211Year Member
Posts: 284
Reputation Power: 12
I was having the exact same problem. The solution for me was simply removing the old thermal paste and re-applying with more than i put on the last time. I also made sure that I was tightening the CPU cooler enough. I hope this helps.
#8. Posted:
ProJimmyRustler
  • 2 Million
Status: Offline
Joined: Jul 14, 20149Year Member
Posts: 1,720
Reputation Power: 71
Status: Offline
Joined: Jul 14, 20149Year Member
Posts: 1,720
Reputation Power: 71
Gospel wrote I was having the exact same problem. The solution for me was simply removing the old thermal paste and re-applying with more than i put on the last time. I also made sure that I was tightening the CPU cooler enough. I hope this helps.

I'm gonna end up having to do that when I replace the cooler in tomorrow.
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.