What you need:
- 1 Jtagged console of any type and enough space on the HDD.
- A copy of the disc you want to copy.
- Xexmenu installed and functioning.

Lets get started.

1. Turn on your jtag normally with no disc inserted.
2. Navigate through the dashboard like so : Games library > Xexmenu and start the application.
3. Navigate yourself into your HDD directory.
4. When in the directory, press "Y" to bring up an options list and select "Create". Enter in a name and this will create a new folder for your game to be copied into.
5. Enter the folder by pressing "A" then once inside press "Y" and select the "Copy Dvd" option from the list.

VERY IMPORTANT FOLLOW THESE NEXT STEPS CAREFULLY.

6. This will eject your disc tray and prompt you with a confirmation screen.
7. Insert the disc and close the tray WITH YOUR HAND not the eject button.
8. Wait 5 - 10 seconds until you can feel the disc start spinning and then click the confirm button. Many people miss this step and it wont work if you do.
9. The game will now start copying. MAKE SURE THAT YOUR CONTROLLER DOES NOT TURN OFF DURING THIS PROCESS. If it does the copying of the ISO will stop and youre going to have to start all over again.
10. When its done copying, you have successfully completed the game installation congrats!

For this Tut i will use MW2 as a EXAMPLE

When you have got the files needed to update MW2 (Tu8)

Files that come with MW2 Tu8:
- default_mp.xexp
- default.xexp
- dlc1_ui_mp.ff
- dlc2_ui_mp.ff
- TU_10LC20N_0000...0.000000000020A

Download:
[ Register or Signin to view external links. ]


1. Once you have download the files, put them on a USB.
2. Plug the USB into your JTAG/RGH/DEV KIT.
3. Go into EXEMenu, copy all files into your MW2 folder ACCEPT TU_10LC20N_0000...0.000000000020A!!!
4. Copy TU_10LC20N_0000...0.000000000020A and place it into your cache folder.

THIS IS THE SAME FOR ALL CODS JUST MAKE SURE YOU PUT THE TU FILE IN THE CACHE FOLDER!!!

Grab USB drive.
1. Plug the USB drive into your computer
2. Download the Dah Launch
3. Extract the downloaded file.
4. Put the Dash Launch folder in the root of your USB drive.
5. Put the USB drive in your JTAG or RGH console.
6. Boot up your JTAG or RGH console.
7. Load up XeX Menu.
8. Once XeX Menu is booted up, click RB.
9. If you have more than one USB drive or HDD plugged in, you may have to press right on the D-Pad in order to find your Dash Launch 3.03 folder.
10. Once you find your Dash Launch folder, click on it, then launch the "default.xex."

SDK neighbourhood is a program with allows you to connect your PC to your JTAG/RGH/DEV KIT. doing this allows you to run games and mods without having to go through xexmenu, this also allows you to run tools that allow you to run mods during a game.

ON THE JTAG/RGH/DEV KIT:

1. Download SDK (I CAN NOT PROVIDE A LINK BECAUSE IT IS UNDER COPYRIGHT) you can find SDK early on pirate bay.
2. Download the plugins
- xbdm.xex
- RPC.xex
3. Once you have downloaded the plugins, put them on a usb.
4. Plug the USB in to your JTAG/RGH/DEV KIT,
5. Copy both files onto your HDD.
6. Then go to dash launch.
7. Go to plugins, go down to plugin 1 and press A and select HDD, then select xbdm.xex. Then go to plugin 2 and select RPC.xex.
8. After you have selected the plugins press RB then go down to HDD and press X (THIS WILL SAVE THE PLUGINS)

ON THE PC:

1. Install SDK neighbourhood.
2. After you have installed SDK select XBOX 360 neighbourhood (which will be on your desktop)
3. when it open select find XBOX.
4. it will ask you for the IP of your console. (THIS CAN BE FOUND ON XEXMENU BY PRESSING RB WHEN XEXMENU IS FIRST OPENED)
5. After you have found your JTAG/RGH you are ready to go.

Things you need to know:
- The only public server is EXBLS (XBLS IS OVER AND DOESNT EXSIST ANYMORE)
- IT is not free

I DO NOT SELL EXBLS TIME SO DONT ASK ME

How to Install:
1. You have to buy time off the EXBLS owners, they will send you the files.
2. once you have the files
- launch.ini
- xbdm.xex
- XBLStealth.xex
3. place all files on the root of your HDD
4. Put XBLStealth as the first plugin , then put xbdm.xex/RPC.xex as 2, 3 as show in the above Tut on SDK.
5. now restart your console and then you are good to go.

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

After you are done downloading the programs needed, place them on the root of your USB ( The first page that pops up when you open it)

Now just follow these steps and let me know if anybody has any issues

1- Place your USB, with flash360 and 360flashtool on it, into your JTAG console
2- Power on your console and navigate to xex menu and open it
3- use the Right Bumber on you controller to navigate to the USB tab
4- Click on flash360 and it should direct you to a blue screen with small words on it
5- click "x" to write the original NAND of your xbox to your USb. (follow the rest of the instructions for it to begin)
6- Remove your USB from your xbox and place it into your computer
7- The Original NAND of your JTAG should have saved as flashdmp.bin

1- Double click on 360 Flash tool
2- Browse for the flashdmp.bin file on USB and open it with 360 flash tool
3- click the keys tab a the top of the screen and make sure the two top boxes are check marked
4- Next, write in the CPU key of your JTAG where it says "CPU" ( To get this code power off your JTAG, then hit the eject button on the disc tray. After the screen has stopped moving your CPU key should be there)
5- After you have typed in your CPU key click "ok" and everything should dissapear.
6- Open the flashdmp.bin file with 360 flash tool again and all of your Console information should be listed below
7- Take note of your DVD key and DVD drive type because you will need it later.

1- Next click the "import" button and select "key Vault"
2- Browse for the KV_dec.bin file you should have saved on your desktop (thats the new unbanned KV)
3- Save that as "edit01.bin"
4- Open edit01.bin in 360 flash tool
5- Then click the patch button on the bottom left and hit "patch Key Vault"
6- (This is where your DVD key and Drive Type comes in handy) Then copy your DVD key and look for your Drive type in the scroll box. *Note- If you do not do this your JTAG could be damaged
7- Then lastly, save that file as "updflash.bin"

FINAL STAGE
1- Place the updflash.bin file onto the root of your USB
2- Place the USB into your JTAG and direct yourself to xexmenu
3- once you are in xexmenu browse in the USB tab for 360 Flash tool
4- Hit "A" to rewrite you current NAND
5- Hit "B" to rewrite you NAND without keeping your current KV
6- Hit "Start" to allow a mismatch to occur (sometimes you have to hit start twice)
7- Then Finally hit "A" to continue on with the procedure
8- Hit any button to continue
9- Then hit the "Back" button twice to reboot your JTAG

You should finally be unbanned and ready to host

THE NEW WAY TO ADD A KV USING JUST EXBLS:

1. First pull out your ethernet cable/disconnect your console from the internet.
2. Put your NEW KV and cpu file on your USB.
3. Copy the two files on to the root of your HDD
4. Now turn off your console, then turn it back on
5. When it turns on it should say "Reboot to finalize". Do as it says and reboot.
6. When it reboots it will say "EXBLS disconnected network error".
7. Once it says this message, turn off the console.
8. When the console is turned off, Plug your ethernet cable back in.
9. Turn your console back on.
10. When it boots up it should say "EXBLS platinum fully stealth"
11. NOW YOU CAN GO ONLINE!!!

THIS IS A TUT ON HOW TO SYSTEM LINK INFECT YOUR RETAIL. I AM USING MW2 XP PATCH FOR A EXAMPLE BUT THIS WILL WORK THE SAME WAY AS ANY OTHER COD (FOR EXAMPLE COD4 IS Patch_mp.ff INSTEAD DLL.)

JTAG/RGH/Dev Kit.
Retail xbox 360
Modded .DLL File & Modded Default_mp.xex/Default_mp_Launcher.xex

Once you have Copy & Pasted your files into your MW2 Game Root Folder, than you need to start up your JTAG/RGH/Dev. Kit.
Go into XeXMenu and go to you MW2 Game Root Folder.
Scroll down to your Default_mp.xex/Default_mp_Launcher.xex File and launch it.
Go to System Link --> Create Match. Then Start the game.
Now start up your retail, take a Ethernet Cord and connect your Retail and JTAG/RGH/Dev. Kit to each other.
On your retail join your JTAG/RGH/Dev. Kit's Match.
Press the Back Button on your JTAG/RGH/Dev. Kits Controller, text should show up on the screen.
Once infection is completely back out on your retail and go into private match, Invite your friends and start the game.
It should end 5 mins. after the countdown is finished.
Now you should have been forced into a Public FFA Match.

1. Copy Dll. onto your USB (this might come with a default_mp.xex) if so put that on USB swell.
2. Place the Dll. and the default_mp.xex into your MW2 directory.
3. If it asks to replace the existing file, do it.
4. Once all files are in the correct place find the default_mp.xex and click on it.
4. Your Dll. will load

Tu8 Files

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]