You are viewing our Forum Archives. To view or take place in current topics click here.
MTU Error Fix On Xbox 360? Fix Error In 1-4 Easy Steps!
Posted:

MTU Error Fix On Xbox 360? Fix Error In 1-4 Easy Steps!Posted:

TTG_Sypher
  • Powerhouse
Status: Offline
Joined: May 07, 201112Year Member
Posts: 443
Reputation Power: 19
Status: Offline
Joined: May 07, 201112Year Member
Posts: 443
Reputation Power: 19
How to Fix Within 1-4 Easy Steps!

Hey guys i was playing Xbox and sometimes it disconnects you from XBL because of your connection but this problem is in your connection with the MTU Error. Your Connection doesnt have a stand xbox 1635 Standard and you need to change it.


PLEASE READ DON'T SKIP ANYTHING EVERYTHING HERE IS WRITTEN FOR A REASON!!!!

1.What You need to do is Leave your MTU alone, Only if you just seen this message for the first time and you could play XBL fine before.

2.Next Just Unplug Your router Or modem wait about 40 seconds {with xbox at Test Connection} Then test your connection,It SHould come back on if not try step 2.

3.If that doesnt work Turn your Xbox off for about 10 minutes.If that doesnt work, Unplug your Modem And Router for a full 1 Minute...

3.And if it continues to be unresponsive just change your MTU Settings to its standards.


For Those Who have Wireless Internet Connection Build Into There Xbox:
Just Leave your xbox off for about 10 minutes for Cool down and
It will fix the network... if not Change the MTU settings

For A video Tut On How to Change Your MTU on Windows/Vista
MUST READ SPOILER BEFORE USAGE
Lowering your MTU

Lowering the MTU can be used in conjunction with disabling Nagle. There are two ways to change your MTU, via software, or hardware.

The lower you set your MTU, the less skill lag you will have. It is recommended that you start at 386 and make it lower to see if there is an improvement. Make sure your MTU is an even number, divisible by 2 or 4. Typically, on a low-speed connection, you will not see any improvement or it will become worse.

Warning: Lowering your MTU too much will decrease your throughput (speed) dramatically. Do NOT change below 1500 when not necessary. Although you will be able to use skills faster, you may be more prone to occasional lag spikes or disconnection due to a severely limited connection speed from your computer, especially on wireless connections. It is recommended that one finds a balanced MTU for your connection speed. You must able to change your MTU back to 1500 readily when you need to use an HTTP connection. The minimum MTU that your TCP/IP connection can function with Mabinogi is 48 MTU, which is allows skills to cast/load/change faster than at 386 MTU most of the time. Lowering your MTU to 48 is not recommended unless you have high ranked connection speed. (IE: Optical Fiber) The MTU setting of 129 seems to give the best results while still preserving the functions of the game. If slow connection bothers you, consider making Batch files, one to lower the MTU for Mabinogi, and one to reset it afterwards. Side Effects (Setting at 128~48 MTU): Slow pet summon speed. Slow shop opening speed. High sensitivity to Server-Side Lag. Unable to read books (HTTP connection). Unable to view Exploration Chronicle. Unable to search Housing Board. To avert these side effects on Windows 7 and Vista please change your MTU back to 1500 as soon as you are logged in a channel. This the pattern; the lower the MTU the less the skill delay: Skill Change Speed: 1500-768-512-386-256-128-48 Slow-------------------------------------Fast Decide for yourself which MTU is the best for what you are doing on mabi. Note: Sometimes you will not see faster skill change times, if you encounter this, please change to a different channel, it is recommended to test all the channels in your server.


[ Don't Try Unless Tried Other Steps Above!!!!!!!!!!!!!!!!!!!!!! ]



1a.How To Change MTU [ Don't Try Unless Tried Other Steps Above!!!!!!!!!!!!!!!!!!!!!! ]
-Change MTU on Software This will only affect you and your current connection

Windows XP (In the same way you disabled nagle:) Click Start -- RUN and type "regedit" and press enter. Navigate to the following Registry Key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ AdapterID In the right-panel, create a new DWORD named "MTU" with the value (in Decimal). Restart your computer. Or use [ Register or Signin to view external links. ] to change MTU

The classic XP MTU change methods do not work for vista.
Windows Vista and Windows 7 see: [ Register or Signin to view external links. ] Summary: Run: cmd.exe as Administrator Type/CopyPasteEdit: (For wired connection):

netsh interface ipv4 set subinterface "Local Area Connection" mtu=386 store=persistent (For wireless connection):

netsh interface ipv4 set subinterface "Wireless Network Connection" mtu=386 store=persistent 3. Press Enter 4. Relog/change channels if you have mabi open already. Restarting computer is unnecessary on vista/win7. Some connections may not follow the standard names. To see your current connection name, right-click the double computer icon and click 'Network and Sharing Center'. In the first section, second row is your current connection name. Remember you must enter the exact name for it to work.


Hope This Helped.
Don't Forget To Thank
The Topic
-Sypher
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.