1st go to Forums/t=3076731/mod-mw3-system-l...-only.html

download those tools with virus scans 0 detection

then download XDK (xbox development kit) software il try to upload that later today

WHEN you download and install XDK reboot your pc aka restart it

assuming you have xbdm.xex on your jtag+launch.ini already configured to connect to XDK

when your pc restarts double click xbox neighborhood on your desktop(ICON)

click add console -ON jtag go to system settings-network settings-configure then type the ip address for your jtag in xbox neighborhood then click next

check YES to save as default

click finish

NOW xbox neighborhood will create a icon in xbox neighborhood called (Jtag)

right click the icon and click screenshot...

now whats on your jtag screen at the time of you clicking screenshot is what xbox neighborhood will take a picture of

if your connected your picture should come up on your pc moniter

if not you`ll get a message saying error 192.168.?.? is not connected

if you get this then make sure your launch.ini says this

[QuickLaunchButtons]
Default = Hdd:\Free Style\default.xex
BUT_X = Hdd:\Content\0000000000000000\C0DE9999\00080000\C0DE99990F586558


[Settings]
nxemini = true
pingpatch = true
contpatch = true
fatalreboot = false
regionspoof = true
exchandler = false
debugout = false
liveblock = false


[Plugins]
plugin1 = Hdd:\xbdm.xex

and put xbdm.xex in the root of your HDD

example:
cache
content
launch.ini
xbdm.xex

once you done that or IF xbox neighborhood connects and takes a screenshot LOAD up mw3 default_mp.xex

go to system link and sit at the screen were you can start the game(optional)

open up RTC UPDATED go to the top of this post and click my TTG link to my post with it in

once click RTC tool click settings then for TITLE UPDATE type what TU you have on your jtags HDD for mw3 i type 1 FOR TU1 and 8 for TU8 they both worked great

for ip address type your jtags ip address same 1 as you did for xbox neighborhood

then for xex type (0) for default.xex or type (1) for default_mp.xex then close the window for settings then CLICK on Dvars tab then click REFRESH OR press (F5)

and you should see a loading bar at the bottom of RTC if you see that CONGRATS and wait fo rthe dvars to appear

if you dont see that and you see (failed to read dvar table) that means you eathier typed the wrong IP,TU,XEX just double check your settings

POSTED BY wesley2012 if you wish to copy and paste to another site LEAVE CREDIT FOR ME PLEASE for making it